Fujitsu MAT3300FC 사용자 설명서
1.3 Physical Requirements, Electrical Requirements
C141-C008
1-15
1.3 Physical Requirements, Electrical Requirements
1.3.1 Interface connector
The connector for the fibre channel loop bus is an unshielded SCA-2 connector
conforming to SCSI-3 type which has two 20-pin rows spaced 1.27 mm (0.05
inch) apart. Figure 1.8 shows the fibre channel connector. See Section 1.3.2, 1.3.3
for signal assignments on the connector.
conforming to SCSI-3 type which has two 20-pin rows spaced 1.27 mm (0.05
inch) apart. Figure 1.8 shows the fibre channel connector. See Section 1.3.2, 1.3.3
for signal assignments on the connector.
Figure 1.8 SCA2 type interface connector (IDD)