OKI B4520 MFP 9600dpi 09004152 사용자 설명서
제품 코드
09004152
3-6
Setting your machine
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration
GB.fm
To select the reception mode:
Select the option
WITH PAPER
or
WITHOUT PAPER
and confirm your choice with
OK
.
Remark
:
Paper out is indicated by a beep and a message on the screen.
Received faxes are then stored in memory (icon "Fax messages" flashing) to be printed as soon as you add paper
into the feeder.
Received faxes are then stored in memory (icon "Fax messages" flashing) to be printed as soon as you add paper
into the feeder.
Number of copies
You may print incoming documents more than once (1 to 99).
To set the number of each document received:
Enter the wanted number of copies and confirm with
OK
.
At each document reception, your fax will print the number of copies requested.
Relay broadcast
Your fax machine (initiator) can relay a document, in other words, transmit a document to your
subscribers via a remote fax and with a precise relay list.
To do this the initiator fax and the remote fax must both have the relay function.
To relay you need to supply the remote fax with the document and the relay list number. The remote
fax will then transmit this document to all subscribers on the list.
Once the relay is activated by your fax and as soon as the document is received by the remote fax, the
document is printed before relaying to all subcribers on the list.
subscribers via a remote fax and with a precise relay list.
To do this the initiator fax and the remote fax must both have the relay function.
To relay you need to supply the remote fax with the document and the relay list number. The remote
fax will then transmit this document to all subscribers on the list.
Once the relay is activated by your fax and as soon as the document is received by the remote fax, the
document is printed before relaying to all subcribers on the list.
To activate relay from your fax machine:
Insert the document to relay (refer to paragraph Document depositing, page 5-1).
Select
37 OK- FAX / BROADCAST.
Enter the remote fax number where you will relay to or choose your dialling mode (refer to
paragraph Dialling, page 5-3) and press
paragraph Dialling, page 5-3) and press
OK
.
Enter the relay list number used by the remote fax and press
OK
.
You may enter the time you wish to transmit the document next to the current time and press
OK
.
If you wish to modify the document feed type, select one of the options
FEEDER
or
MEMORY
,
then press
OK
.
If you wish, you may enter the number of pages of your documents before transmitting.
Activate relay by pressing key
.
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
choice) to the remote fax which will relay the document.