Philips Smart All-in-One S221C3ANW S221C3ANW/00 사용자 설명서

39

8. Troubleshooting & FAQs

•  Turn on your monitor and then turn on 

your PC.

Q2: 

 What is the recommended refresh 

rate for 

SMART All-in-One

?

Ans.:   Recommended refresh rate in 

SMART 

All-in-One

 is 60Hz, In case of any 

disturbance on screen, you can set it 

up to 75Hz to see if that removes the 

disturbance. 

Q3:

What are the .inf and .icm files on the

CD-ROM? How do I install the drivers 

(.inf and .icm)?

Ans.:   These are the driver files for your 

monitor. Follow the instructions in your 

user manual to install the drivers. Your 

computer may ask you for monitor 

drivers (.inf and .icm files) or a driver 

disk when you first install your monitor. 

Follow the instructions to insert the ( 

companion CD-ROM) included in this 

package. Monitor drivers (.inf and .icm 

files) will be installed automatically.

Q4: 

 How do I adjust the resolution?

Ans.:   Your video card/graphic driver and 

monitor together determine the 

available resolutions. You can select the 

desired resolution under Windows

®

 

Control Panel with the "Display 

properties".

Q5: 

 What if I get lost when I am making 

monitor adjustments via OSD?

Ans.:   Simply press the OK button, then select 

'Reset' to recall all of the original factory 

settings.

Q6: 

 Is the LCD screen resistant to 

scratches?

Ans.:   In general it is recommended that 

the panel surface is not subjected to 

excessive shocks and is protected from 

sharp or blunt objects. When handling 

the monitor, make sure that there is 

no pressure or force applied to the 

panel surface side.  This may affect your 

warranty conditions.

Q7: 

 How should I clean the LCD surface?

Ans.:   For normal cleaning, use a clean, soft 

cloth. For extensive cleaning, please use 

isopropyl alcohol. Do not use other 

solvents such as ethyl alcohol, ethanol, 

acetone, hexane, etc. 

Q8:    Can I change the color setting of my 

monitor?

Ans.:   Yes, you can change your color setting 

through OSD control as the following 

procedures,

•  Press "OK" to show the OSD (On Screen 

Display) menu

•  Press "Down Arrow" to select the option 

"Color" then press "OK" to enter color 

setting, there are three settings as below.
1.  Color Temperature; With settings in the 

6500K range the panel appears "warm, 

with a red-white color tone", while a 

9300K temperature yields "cool, blue-

white toning". 

2.  sRGB; this is a standard setting for 

ensuring correct exchange of colors 

between different device (e.g. digital 

cameras, monitors, printers, scanners, 

etc) 

3.  User Define; the user can choose his/

her preference color setting by adjusting 

red, green blue color.