Cisco FactoryUpgrade 8MB DRAM to 12MB 800Series (B) MEM800-8U12D 사용자 설명서
제품 코드
MEM800-8U12D
2
Release Notes for Cisco IOS Release 12.0(7)XV Feature Packs for the Cisco 800 Series
78-10446-01
Introduction
•
Feature set—A group of features. For example: IP, IP Plus, Enterprise Plus, and IP Sec 56
•
Image—Software code containing a Cisco IOS feature set. The image file naming nomenclature,
such as c800-y6-mw, c1000-bnsy40-mz, and c2500-g-l, specifies a platform, feature set, and file
compression method. For example, c4500-is56i-mz indicates:
such as c800-y6-mw, c1000-bnsy40-mz, and c2500-g-l, specifies a platform, feature set, and file
compression method. For example, c4500-is56i-mz indicates:
–
Platform: (c4500) 4500 platform.
–
Feature set: (is56i) IP Plus IP Sec 56.
–
Compression method: (mz) RAM, zip compressed.
How to Use These Release Notes
The tables in these release notes contain details about the Cisco feature packs. Use these tables to
perform the following tasks before loading a software image onto a router:
perform the following tasks before loading a software image onto a router:
1.
Use Table 1, “Cisco 800 Series Default Memory and Upgrade Options,” for the feature set memory
requirements, factory-default memory, and available memory upgrades for your Cisco 800 router.
requirements, factory-default memory, and available memory upgrades for your Cisco 800 router.
2.
Use Table 3, “Feature Pack Product Numbers Quick-Reference List,” to identify the software image
you want to load.
you want to load.
3.
Use Table 4, “Cisco 800 Series Routers Feature Packs,” to identify your feature pack and the
memory required for your feature set, based on the image you load.
memory required for your feature set, based on the image you load.
4.
Use the tables in the “Feature Set Tables” section on page 6 to identify which features are supported
in a feature set image.
in a feature set image.
Feature Pack Components
The feature pack box typically contains the following items:
•
A CD-ROM with the following software:
–
Cisco IOS feature set software images that can include bundled modem firmware.
–
The Router Software Loader (RSL) program (a Windows 95 application) that loads images
onto your Cisco 800 series router.
onto your Cisco 800 series router.
–
Trivial File Transfer Protocol (TFTP) server application (for Windows 95 only).
•
Getting Started with the Router Software Loader.
Note
If you cannot use the RSL to load images, you can follow the instructions in
the “Alternatives to the RSL” section on page 12.
the “Alternatives to the RSL” section on page 12.
•
Release notes (this document).
•
Other configuration or command references, if available.
•
Software license for using Cisco software in object code form on a single access server or router.
•
Documentation CD-ROM that contains all Cisco documentation.