Cisco 1 Port OC-3 Multimode ATM NM-1A-OC3MM-EP= 사용자 설명서
제품 코드
NM-1A-OC3MM-EP=
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Connecting Cisco ATM Network Modules to the
Network
Network
Revised: May 1, 2008, OL-12815-01
This guide describes how to connect Cisco Asynchronous Transfer Mode (ATM) network modules to
your network. It contains the following sections:
your network. It contains the following sections:
•
•
•
•
•
ATM-25 Network Module
The ATM-25 network module (see
) provides ATM traffic shaping for use with asymmetric
digital subscriber line (ADSL) uplink speeds, and protocol support for permanent virtual circuit (PVC)
environments. The network module provides full support for multiprotocol encapsulation over ATM
Adaptive Layer 5 (RFC 1483), classic IP over ATM encapsulation (RFC 1577), and Point-to-Point
Protocol (PPP) over ATM.
environments. The network module provides full support for multiprotocol encapsulation over ATM
Adaptive Layer 5 (RFC 1483), classic IP over ATM encapsulation (RFC 1577), and Point-to-Point
Protocol (PPP) over ATM.