Bosch ISM-BLP1-P 사용자 설명서
Region
Certification
Russia
GOST
IEC 60839-1-3-2001, IEC
60839-2-2-2001, IEC
60839-2-6-2001, GOST 26342-84,
GOST 27990-88
GOST
GOST 12997-84, GOST R
50009-2000, GOST R 51317.3.2-99,
GOST R 51317.3.3-99, GOST R MEK
60065-2002
USA
UL
ANSR: Intrusion Detection Units
(UL639), ANSR7: Intrusion Detection
Units Certified for Canada (cULus)
Italy
IMQ
France
AFNOR
NF, A2P (262263-00)
Sweden
INTYG
05-134; SBSC larmklass 3, miljöklass 2
Installation/configuration notes
Coverage Patterns
17.5 ft
17.5 ft
0 ft
0 m
0 ft
5.5 m
5.5 m
35 ft
0 m
11 m
1
Top View Broad: 11 m x 11 m (35 ft x 35 ft)
1
PIR coverage pattern
0 ft
0 ft
0 m
7.5 ft
2.3 m
35 ft
0 m
11 m
1
2
Side View Broad: 11 m x 11 m (35 ft x 35 ft)
1
PIR coverage pattern
2
Two look-down zones
Mounting
The recommended mounting height is 2.3 m to 2.7 m
(7.5 ft to 9 ft).
The detector can be mounted:
(7.5 ft to 9 ft).
The detector can be mounted:
• On a flat wall (surface, semi-flush) with the optional
B335 Swivel-mount Bracket, or with the optional
B328 Gimbal-mount Bracket,
B328 Gimbal-mount Bracket,
• In the junction of two perpendicular walls, or
• On the ceiling with the optional B338 Ceiling-mount
• On the ceiling with the optional B338 Ceiling-mount
Bracket.
Notice
The use of optional mounting brackets can reduce
the detector's range and increase the dead zone
areas.
The use of optional mounting brackets can reduce
the detector's range and increase the dead zone
areas.
Power Considerations
Power Limits
Input power must be provided by an approved limited
power source. All outputs must be connected to SELV
(safety extra-low voltage) circuits only.
Standby Power
This detector has no internal standby battery. For UL
Listed product installations, 4 hr (40 mAh) of standby
power must be supplied by the control unit or by a UL
Listed burglary power supply.
Input power must be provided by an approved limited
power source. All outputs must be connected to SELV
(safety extra-low voltage) circuits only.
Standby Power
This detector has no internal standby battery. For UL
Listed product installations, 4 hr (40 mAh) of standby
power must be supplied by the control unit or by a UL
Listed burglary power supply.
Parts included
Quant.
Component
1
Detector
1
Hardware pack
1
Literature pack
Technical specifications
Environmental Considerations
Complies with EN50131-2-2 Environmental Class II, Security Grade 2
Relative Humidity:
0 to 85%, non-condensing
Temperature (operating):
-29°C to +49°C (-20°F to +120°F)
For UL Listed product installations,
0°C to +49°C (+32°F to +120°F)
Mechanical Properties
Color:
White
Dimensions:
10.7 cm x 6.1 cm x 4.8 cm
(4.2 in. x 2.4 in. x 1.9 in.)
Material:
High-impact ABS plastic
Radio Frequency
Interference (RFI)
Immunity:
No alarm or setup on critical frequencies in the
range from 26 MHz to 950 MHz at field
strengths less than 50 V/m.
2 | ISM‑BLP1‑P Blue Line Pet‑Friendly PIR Detector