Canon MP470 2177B002 사용자 설명서
제품 코드
2177B002
66
Troubleshooting
Paper Does Not Feed Properly
The machine is not ready.
Check if the Power lamp is lit green.
If the Power lamp is off, turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the
Power lamp stops flashing and remains lit green.
If the Power lamp is off, turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the
Power lamp stops flashing and remains lit green.
Note
When printing large data such as a photo or graphics, it may take longer to start
printing.
printing.
Cause
Action
Printing on inappropriate type of paper.
Check to see if the paper you are printing on is not too thick or curled.
See “Media Types You Cannot Use” on page 14.
See “Media Types You Cannot Use” on page 14.
Paper Feed Rollers are dirty.
Clean the Paper Feed Rollers. Cleaning the Paper Feed Rollers will wear the
rollers, so perform this procedure only when necessary.
For details on cleaning, see “Cleaning the Paper Feed Roller (Roller cleaning)”
on page 53.
rollers, so perform this procedure only when necessary.
For details on cleaning, see “Cleaning the Paper Feed Roller (Roller cleaning)”
on page 53.
Paper not loaded properly.
Make sure of the following when you load paper in the machine.
z
z
When loading two or more sheets of paper, align the edges of the sheets
before loading.
before loading.
z
Always load the paper in portrait orientation in the Rear Tray, regardless of
the printing orientation.
the printing orientation.
z
Load the paper with the print side facing UP. Align the paper stack against
the right side of the Rear Tray and slide the Paper Guide so that it just
touches the left edge of the stack.
the right side of the Rear Tray and slide the Paper Guide so that it just
touches the left edge of the stack.
For details on loading paper, see “Loading Paper” on page 15.
Too much paper loaded.
Make sure that the paper stack does not exceed the load limit.
However, proper feeding of paper may not be possible at this maximum capacity
depending on the type of paper or environmental conditions (either very high or
low temperature and humidity).
In such cases, reduce the sheets of paper you load at a time to around half.
For details on loading paper, see “Loading Paper” on page 15.
However, proper feeding of paper may not be possible at this maximum capacity
depending on the type of paper or environmental conditions (either very high or
low temperature and humidity).
In such cases, reduce the sheets of paper you load at a time to around half.
For details on loading paper, see “Loading Paper” on page 15.
Foreign object in the Rear Tray.
Make sure that there are no foreign objects in the Rear Tray.
Envelopes not prepared nor loaded
properly.
properly.
z
When printing on envelopes, see “Loading Envelopes” on page 17, and
prepare the envelopes before printing.
Once you have prepared the envelopes, load them in the machine in portrait
orientation. If the envelopes are placed in landscape orientation, they will not
feed properly.
prepare the envelopes before printing.
Once you have prepared the envelopes, load them in the machine in portrait
orientation. If the envelopes are placed in landscape orientation, they will not
feed properly.
z
Set the Paper Thickness Lever to the right.
Cause
Action