Zhone BITSTORM-RP2-152-DC 전단

✓

✓

✓

✓

✓

✓

✓

ADSL2+ IP-DSLAM featuring IP/Ethernet
service-aware; AC or DC models available

The Bitstorm-RP family of compact IP-DSLAM products offer feature-rich IP

and Ethernet functions and support Triple Play Services over single or bonded

ADSL2+ lines. The Bitstorm-RP family features forty-eight (48) ADSL2+

ports with integrated splitters (600/900 Ohm-POTS/ISDN), two (2) integrated

100/1000BaseT and two (2) SFP based Gigabit Ethernet fiber uplink

interfaces. Products in this family are available in DC or AC powered models.

The compact form-factor (1.5U) and temperature hardened design of the

Bitstorm-RP DC models allow deployment in remote cabinets, effectively

shortening the local loop and providing high bandwidth connections to

subscribers.

The Bitstorm-RP family delivers line-rate performance and triple play services

supported by advanced L2/L3 features such as - DHCP Option 82, IGMP

Snooping/Proxy, QoS and Security/Filtering in either Bridged or VLAN

Switched operating modes. In addition, the Bitstorm-RP now supports Cabinet

Mode, which is normally used on systems located in outside plant (i.e. street)

cabinets which share the same binder group as DSL services originating from

the CO. When configured on a DSL port, the Cabinet Mode feature disables

the use of all downstream frequencies below a specified cut-off frequency and

can be used to minimize cross talk and interference with CO-based DSL

services.

The Bitstorm-RP features an intuitive Web Graphical Interface (GUI) with

online configuration help for device management. It also supports a complete

set of ADSL MIBs for SNMP based management along with ZMS integration

for device fault identification, database backup and restoration.

Field-replaceable fan and filter units provide serviceability and ensure

longevity in harsh environments. The Bitstorm-RP DC models are temperature

hardened to operate in -40ºC to +65ºC range of temperature.