ABC Products Card Reader CARD READER 전단

ABC

P   R   O   D   U   C   T   S

Instructions for

ABC PRODUCTS ALL IN ONE CARD READER

After you’ve installed the card reader onto you computer, push you memory card

into the appropriate slot on the card reader. Some memory cards have to be placed

in the card reader upside down like SONY MAGICGATE, COMPACT FLASH and 

Connect the card reader to your PC or MAC by inserting the USB cable

provided into the USB slot on the card reader (located on the right hand side

of the card reader. The other end of the cable goes into the USB slot on your

PC or MAC 

The slot for the COMPACT FLASH card is on the back 

of the unit. The CF card has to be turned upside down before it is inserted into

the card reader. Before inserting the card check that all of the pins inside the CF slot

are in tact and straight. If even one pin is bent or missing it can cause the card reader

to reject the CF card. In this case contact us for a replacement card reader

When the card is correctly inserted into the card slot the computer will

recognise the card. At this point a light may show on your card reader.

Don’t be alarmed if the is no light. There are many different models of

the ABC card reader, some show a red light, some show a green light and 

some show an orange light. Some show no light at all. You will know if your 

card reader is working because it will register on your computer