Enersys NP7-12, 12V NP7-12 사용자 설명서
제품 코드
NP7-12
INCH = MM
0.472
11.99
0.250
6.35
0.236
5.99
0.187
4.75
0.130
3.30
0.079
2.01
0.020
0.51
Publication no: uS-nP-RS-004 • march 2008
Range Summary
3
www.enersys.com
TERMINAL ILLUSTRATION
LAYOUT ILLUSTRATION
4
3
2
1
7
8
9
6
5
Faston Tab: 187
Charging
• Standby use: Apply constant voltage charging at 2.275 volts
per cell (or 2.25–2.30VPC).
• Cyclic use: Apply constant voltage charging at 2.40-2.50 VPC.
Initial charging current should be set at less than 0.25CA.
• Top charge: Product in storage (ambient temperature 25°C/77°F)
requires a top charge every six months. Apply constant voltage at
2.40 volts per cell, initial charging current should be set at
less than 0.1CA for 15 to 20 hours.
2.40 volts per cell, initial charging current should be set at
less than 0.1CA for 15 to 20 hours.
Discharge
• Stop operation when voltage has reached the minimum
permissible voltage. Recharge immediately.
• Do not operate at 6CA or more current continuously.
Storage
• Always store battery in a fully charged condition.
• If battery is to be stored for a long period, apply a recovery
top-charge every 6 months.
• Store batteries in a dry and cool location.
Temperature
• Keep within ambient temperatures of –15°C to +50°C
for both charging and discharging.
Incorporating battery into equipment
• Encase battery in a well ventilated compartment.
• Avoid installing battery near heated units such as a transformer.
• House the battery in the lowest section of the equipment
enclosure or rack to prevent unnecessary battery temperature rise.
Others
• Avoid terminal short circuit.
• DO NOT expose to open flame.
• Avoid setting batteries in environments which can cause
direct contact to gasoline, paint thinner, organic solvents,
synthetic resins, oil, etc.
synthetic resins, oil, etc.
Faston Tab: 187
Faston Tab: 250
M5 Bolt Fastened Terminal
INCH = MM
0.250
6.35
0.187
4.75
0.124
3.15
0.098
2.49
0.059
1.50
0.031
0.79
0.020
0.51
0.004
0.10
INCH = MM
0.313
7.95
0.250
6.35
0.180
4.57
0.098
2.49
0.059
1.50
0.031
0.79
0.020
0.51
0.004
0.10
INCH = MM
0.472
11.99
0.453
11.51
0.217
5.51
0.079
2.01
A
B
C
D
INCH = MM
0.709
18.01
0.551
14.00
0.256
6.50
0.236
5.99
M5
M6 Bolt Fastened Terminal
M6
M6 Threaded Receptacle
M5 Threaded Receptacle
INCH = MM
0.530
13.46
0.420
10.67
0.310
7.87
0.230
5.84
0.160
4.06
E
F
G
H
JST No. VHR-2N
INCH = MM
0.870
22.01
0.550
13.97
0.430
10.92
0.230
5.84
INCH = MM
1.100
27.94
0.910
23.11
0.510
12.95
0.390
9.91
0.330
8.38
INCH = MM
1.024
26.01
0.910
23.11
0.430
10.92
0.335
8.51
0.315
8.00
INCH = MM
0.860
21.84
0.530
13.46
0.430
10.92
0.295
7.49
M10 Bolt Fastened Terminal
Tyco. 1-480318-0
M8 Bolt Fastened Terminal
“Camcorder” Terminal
I
J
K
L
INCH = MM
0.806
20.47
0.760
19.30
0.690
17.53
0.630
16.00
0.394
10.01
0.335
8.50
Note:
Dimensions are in inches (mm)
Tolerances are
± 0.02 in. for dimensions < 5mm
± 0.04 in. for dimensions
Dimensions are in inches (mm)
Tolerances are
± 0.02 in. for dimensions < 5mm
± 0.04 in. for dimensions
≥ 5mm
± 0.08 in. for all height dimensions
unless otherwise specified.
unless otherwise specified.
M8
M8 “Universal” Bolt Fastened Terminal
M