Eaton EMI313-10 사용자 설명서
4
EATON Eaton ePDU G3
High operating
temperature
All G3 models are fully
functional in high operating
temperature environments
up to 140°F (60°C), resulting
in reduced cooling costs. A
higher operating temperature
is needed for most modern
hot-air containment solutions.
Since ePDUs are located in
the back of the rack where
server exhaust can elevate
temperatures to as high
as 116°F, based on ASHRAE’s
80.6°F maximum inlet
temperature guidelines,
it’s important to have the
right solution.
functional in high operating
temperature environments
up to 140°F (60°C), resulting
in reduced cooling costs. A
higher operating temperature
is needed for most modern
hot-air containment solutions.
Since ePDUs are located in
the back of the rack where
server exhaust can elevate
temperatures to as high
as 116°F, based on ASHRAE’s
80.6°F maximum inlet
temperature guidelines,
it’s important to have the
right solution.
Modern hot-air containment solution with ePDUs located in the hot air exhaust section
Daisy chain four units from one IP address
Eaton’s new patented daisy chain is available on all network-connected G3 models. This feature allows four ePDUs to share
the same network connection and IP address, resulting in a 75 percent reduction in network infrastructure costs, compared to
competitor rack PDUs that require a dedicated IP address.
the same network connection and IP address, resulting in a 75 percent reduction in network infrastructure costs, compared to
competitor rack PDUs that require a dedicated IP address.
Demonstrated cost difference based on two ePDUs per rack:
Ease of installation
• Patented clip feet allow for
various mounting methods
• Mounting buttons come
pre-installed to reduce
installation time
• Double-sided aluminum
buttons accommodate
different variations of metal
thickness
• Optional side mounting
button locations to mount
G3s at a 90-degree rotation
in the rack, preventing
interference with hot-swap
fans and power supplies
Eaton patented clip feet
Clip feet easily attach to ePDUs
Mounting buttons come
pre-installed on each G3
pre-installed on each G3
100 racks
200 racks
400 racks
Dedicated IP address
$40,000
$80,000
$160,000
Daisy chain method
$10,000
$20,000
$40,000
Cost savings
$30,000
$60,000
$120,000