Philips LCD monitor with Webcam, MultiView 272P4QPJKES 272P4QPJKES/75 사용자 설명서
제품 코드
272P4QPJKES/75
11
2. Setting up the monitor
MultiView in OSD menu
PiP / PbP Mode: There are two modes for
MultiView: [PiP] and [PbP].
[PiP]: Picture in Picture
Open up a sub-window of
another signal source.
another signal source.
B
A
(main)
When the sub source is not
detected:
detected:
B
A
(main)
[PbP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source.
by-side of another signal
source.
A
(main)
B
When the sub source is not
detected:
detected:
A
(main)
B
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PbP mode.
bottom of the screen for the correct aspect
ratio when in the PbP mode.
PiP / PbP Input: There are four different
video input to choose as the sub display
source: [DVI], [HDMI 1], [HDMI 2], and
[DisplayPort].
source: [DVI], [HDMI 1], [HDMI 2], and
[DisplayPort].
Please refer below table for compatibility of
main/sub input source.
main/sub input source.
SUB SOURCE POSSIBILITY (xl)
Inputs
DP
DVI HDMI 1 HDMI 2
MAIN
SOURCE
(xl)
DP
ʁ
ʁ
ʁ
DVI
ʁ
HDMI 1
ʁ
HDMI 2
ʁ
PiP Size: When PiP is activated, there are
three sub-window sizes to choose: [Small],
[Middle], [Large].
[Middle], [Large].
B
A
(main)
Small
Middle
Large
PiP Position: When PiP is activated, there
are four sub-window positions to choose.
Top-Left
Top-Right
B
A
(main)
B
A
(main)
Bottom-Left
Bottom-Right
B
A
(main)
A
(main)
B
Swap: The main picture source and the sub
picture source swapped on the display.
Swap A and B source in [PiP] mode:
B
A
(main)
Ƚ
A
B
(main)
Swap A and B source in [PbP] mode:
A
(main)
B
Ƚ
B
(main)
A
Off: Stop MultiView function.
A
(main)