Philips Micro music system DCB3070 DCB3070/79 사용자 설명서
제품 코드
DCB3070/79
17
EN
6 Listen to radio
Listen to DAB radio
DAB (Digital Audio Broadcasting) radio
broadcasts radio digitally through a network of
transmitters.
Store DAB stations
Before you can listen to DAB radio, store DAB
stations onto the unit.
If you connect the unit to AC power supply
and no DAB station is stored, the unit prompts
you to search and store all the available DAB
stations (see "Get started" > "Store DAB
stations").
Or
1
Press FM/DAB to turn on DAB radio.
2
Press MODE/SCAN.
»
The unit begins to perform a search.
»
When all the available DAB stations
are stored, the first stored DAB station
is broadcast.
Tip
•
The signal icon (*) is displayed, and its position indicates
a degree of signal strength. The further towards the
right, the stronger the signal strength.
•
If no DAB coverage is currently available or no DAB
station is found, [NO DAB] (no DAB) is displayed.
Tune to a DAB station
After DAB stations are stored, you can tune to
a DAB station.
1
In DAB mode, press / repeatedly
until a station name is displayed.
2
Press OK to confirm the selection.
»
The radio immediately tunes to the
selected station.
Note
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
Program DAB stations manually
You can program a maximum of 20 preset DAB
stations.
1
Tune to a DAB station.
2
Press PROG/CLOCK SET to activate
program mode.
3
Press to allocate a number (1-20) to
this radio station, and then press PROG/
CLOCK SET to confirm.
4
Repeat the above steps to program other
stations.
Note
•
If a DAB station is stored under a preset location, a
new DAB station assigned to this location overwrites
the old DAB station.
•
DAB station presets do not overwrite FM presets.
Select a preset DAB station
After the DAB stations are programmed on the
unit, you can select a preset DAB station.
1
In DAB mode, press to select a
preset number.