DeLOCK M.2 NGFF SATA 64GB 54618 전단
제품 코드
54618
Delock M.2 NGFF SATA 6 Gb/s SSD 64 GB 60 mm
Description
This Delock M.2 NGFF (Next Generation Form Factor)
SSD supports the new M.2 standard and allows higher data
transfer rates than mSATA. Another advantage is the even
lower mounting height, which makes the SSD ideally suited
for installation in Ultrabooks and tablet PC. Due to its low
power consumption, the SSD can also be used as a bootable
drive for embedded systems. An M.2 NGFF interface, that
has been designed as the successor of the mSATA interface,
can already be found in a lot of laptops and tablet PC of the
latest generation.
SSD supports the new M.2 standard and allows higher data
transfer rates than mSATA. Another advantage is the even
lower mounting height, which makes the SSD ideally suited
for installation in Ultrabooks and tablet PC. Due to its low
power consumption, the SSD can also be used as a bootable
drive for embedded systems. An M.2 NGFF interface, that
has been designed as the successor of the mSATA interface,
can already be found in a lot of laptops and tablet PC of the
latest generation.
Specification
• Memory capacity: 64 GB
• Memory chip: MLC NAND, 4 channels
• Controller: JMicron JMF667 H
• Interface 59 Pin SATA 6 Gb/s M.2 NGFF key B+M
• Transfer mode: SATA 6 Gb/s
• Operating voltage: 3.3 V +/- 5%
• Operating temperature: 0 ~ +70 °C
• Storage temperature: -40 ~ +85 °C
• Endurance:
Write / Erase: 130 TB
Read: unlimited
• Supports Dynamic Power Management, Static and Dynamic Wear-Leveling, Bad Block
Management, SMART (Self-Monitor Analysis and Reporting Technology) and TRIM
• Max. data transfer rates dependent on memory capacity and system configuration
(measured in AHCI mode at 6 Gb/s):
Read: 475 MB/s
Write: 160 MB/s
• Power consumption:
Read: 1.26 W
Write: 1.53 W
Idle: 0.37 W
• MTBF: > 2.000.000 hrs.
• Vibration: 3.1 G, 2 ~ 500 Hz
• Shock: 50 G / 11 ms
• Dimension (LxWxH): ca. 60 x 22 x 3.2 mm
• Weight: ca. 5.7 g
• Memory chip: MLC NAND, 4 channels
• Controller: JMicron JMF667 H
• Interface 59 Pin SATA 6 Gb/s M.2 NGFF key B+M
• Transfer mode: SATA 6 Gb/s
• Operating voltage: 3.3 V +/- 5%
• Operating temperature: 0 ~ +70 °C
• Storage temperature: -40 ~ +85 °C
• Endurance:
Write / Erase: 130 TB
Read: unlimited
• Supports Dynamic Power Management, Static and Dynamic Wear-Leveling, Bad Block
Management, SMART (Self-Monitor Analysis and Reporting Technology) and TRIM
• Max. data transfer rates dependent on memory capacity and system configuration
(measured in AHCI mode at 6 Gb/s):
Read: 475 MB/s
Write: 160 MB/s
• Power consumption:
Read: 1.26 W
Write: 1.53 W
Idle: 0.37 W
• MTBF: > 2.000.000 hrs.
• Vibration: 3.1 G, 2 ~ 500 Hz
• Shock: 50 G / 11 ms
• Dimension (LxWxH): ca. 60 x 22 x 3.2 mm
• Weight: ca. 5.7 g
Item No. 54618
EAN
4043619546183
Country of origin
China
© 2014 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
www.delock.com
1