Siemens S450IP Telephone S450IP 사용자 설명서

Gigaset S450 IP / KBA GBR / A31008-M1713-L121-2-7643 / starting.fm / 21.2.07

Ve

rs

ion 4,

 16

.09.

2005

¤

Insert the batteries the right way round 

(see figure).

The polarity is indicated in/on the battery 

compartment.

The handset turns on automatically. 

You will hear a confirmation tone.

¤

First, align the notches on the side of 

the battery cover with the protrusions 

on the inside of the housing.

¤

Then press the cover until it clicks into 

place.

¤

If fitted, remove the belt clip.

¤

Place your finger in the headset socket 

cavity and pull the battery cover 

upwards. 

Connecting up the charging cradle and 

mounting it on the wall (if required) is 

described at the end of this user guide.

¤

To charge the batteries, leave the hand-

set in the charging cradle. 

Use only the rechargeable batteries recom-

mended by Siemens on page 36! This means 

that you must not use conventional (non-

rechargeable) batteries or other battery types, 

otherwise serious damage to health and prop-

erty cannot be ruled out, e.g. the outer casing 

of the batteries could be destroyed or the bat-

teries could explode. The phone could also 

malfunction or be damaged as a result of using 

batteries that are not of the recommended 

type.

– Only place the handset in the charging cra-

dle that is intended for it.

– If the handset has turned itself off because 

the batteries are flat and if it is then placed 

in the charging cradle, it will turn itself on 

automatically.