Fujitsu PRIMERGY TX200 S3 CFY:TX200S3-004IN 전단
제품 코드
CFY:TX200S3-004IN
Datasheet
⏐ Issue: July 31, 2007⏐ PRIMERGY TX200 S3
Page 2 / 2
Type
Dual Socket Tower Server
System board
D 2109
Chip set
Intel® 5000V
Processors
Dual- or Quad-Core Intel® Xeon® (1 - 2)
Frequencies (GHz)
5050 (3.00) / 5060 (3.20), or 5110 (1.60),
5120 (1.86) / 5130 (2.00), 5140 (2.33) Dual-
Core, or E5310 (1,60) E5320 (1.86), E5335
(2.00), E5345 (2.33) Quad-Core
5120 (1.86) / 5130 (2.00), 5140 (2.33) Dual-
Core, or E5310 (1,60) E5320 (1.86), E5335
(2.00), E5345 (2.33) Quad-Core
Front-Side-
Bus/Socket
Bus/Socket
667 / 1066 / 1333; 1066 MHz (E5310/20)
Second-Level-Cache
2x 2 / 4 (51xx) / 2x 4 MB (E53xx), ECC
Memory
1 GByte bis max. 16 GByte
2-way interleaved, registered ECC PC2-5300F FullyBuffered DIMM
RAM; 3 banks with 2 slots each for modules 512 MB, 1, 2 and 4 GB;
SDDC (Chipkill) and hot-spare memory opt.
RAM; 3 banks with 2 slots each for modules 512 MB, 1, 2 and 4 GB;
SDDC (Chipkill) and hot-spare memory opt.
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition
with Global Flash and service partition
Interfaces
Serial 1
Serial 1
1x RS-232-C (9-pin) (usable for
iRMC or system)
iRMC or system)
Serial 2
1x RS-232-C (9-pol)
Parallel (option)
Centronics, 25-pin, EPP/ECP comp.
Keyboard, Mouse
2x PS/2
USB 2.0
1x front, 2x back (UHCI, 480 Mbit/s)
2x internal for backup drive
2x internal for backup drive
Graphics
1x VGA (15-pin)
LAN
1x RJ45, 1x Service-LAN RJ45
Front Panel
On/off button; NMI-, reset button; front LEDs for hard disks access
(green), power (amber/green); front and back for system status
(amber), identification (blue),
(green), power (amber/green); front and back for system status
(amber), identification (blue),
Onboard controller
**
IDE (ATA100)
1-channel Fast-IDE controller for 1 device
SAS variant (LSI1068)
8-Port SAS controller with RAID 0, 1, 1E (1E
requires 3 or more HDD´s) (also for SATA
HDD´s)
requires 3 or more HDD´s) (also for SATA
HDD´s)
RAID option
(PCI card, ZCR)
(PCI card, ZCR)
RAID level 0, 1, 10, 5, 50 extension for
onboard SAS controller
onboard SAS controller
SATA version
(ESB2 onboard)
(ESB2 onboard)
6-Port SATA Controller with RAID level 0,
1,10; RAID 5 iButton key optional
1,10; RAID 5 iButton key optional
LAN (Intel® GilGal)
1x 10/100/1000 Mbit/s Ethernet
(PCE-Boot via LAN from PXE server)
(PCE-Boot via LAN from PXE server)
Server management
Integrated Remote Management Controller
(iRMC) incl. graphics controller, IPMI 2.0
(iRMC) incl. graphics controller, IPMI 2.0
PCI controller ** in SCSI base unit
LSI320/2
2-channel U320 SCSI/RAID 0, 1, 5 controller
with 128 MB SDRAM ECC Cache and TBBU
with 128 MB SDRAM ECC Cache and TBBU
Hard disk drives
36, 73, 146, 300 Gbyte SAS (no mix with
SATA)
80, 160, 250, 500 Gbyte SATA
36, 73, 146, 300 Gbyte SCSI
SATA)
80, 160, 250, 500 Gbyte SATA
36, 73, 146, 300 Gbyte SCSI
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible
capacity may vary.
capacity may vary.
I/O Slots (Standard)
1x PCIe x8, long; 1x PCIe x8 (x4 wired), long; 2x PCI-X 64-bit/ 100
MHz, 1x long, 3,3V; (1 for ZCR in SAS variant, 1x occupied in SCSI
version) (1x with max. 133 MHz (IOOP™), if only 1 slot is occupied)
(with SAS only 66/100 MHz); 1x PCI 32-bit / 33 MHz, long, 5V
MHz, 1x long, 3,3V; (1 for ZCR in SAS variant, 1x occupied in SCSI
version) (1x with max. 133 MHz (IOOP™), if only 1 slot is occupied)
(with SAS only 66/100 MHz); 1x PCI 32-bit / 33 MHz, long, 5V
Drive bays
for hard disks
6x 3.5/1-inch, hot-plug, slide-in chassis
for optional SCSI
hard disks
hard disks
3x 3.5/1-inch, hot-plug, requires
2 bays for accessible drives
2 bays for accessible drives
for accessible drives
3x 5,25/1,6-inch free or;
2x 5,25/1,6-inch free
1x 5,25/0,5-inch for CD,DVD;
CD-/DVD-RW
1x 3,5/1-inch for optional FD
2x 5,25/1,6-inch free
1x 5,25/0,5-inch for CD,DVD;
CD-/DVD-RW
1x 3,5/1-inch for optional FD
System fans
Standard 2 fans
Hot-plug, redundant (option): (2 + 2) fans + 2 fans for CPU`s
Hot-plug, redundant (option): (2 + 2) fans + 2 fans for CPU`s
Electrical values
1x standard or 2x optional redundant hot-plug power supplies
Output power
Output power
600 W / 1 + 1 x 600 W each
Rated voltage range
100 - 240 V
Rated frequency
50 - 60 Hz
Max. rated current
100 V - 240 V / 9.0 A – 5.0 A
Rated current in basic
configuration
configuration
100 V - 240 V / 4.4 A - 1.5 A
Active power
798 W
Apparent power
809 VA
Heat emission
2873 kJ/h (2723 btu/h)
Temperature/Noise/Dimension/Weight
Ambient temperature
10°C - 35°C (DIN IEC 721-3-3) class
3K2
3K2
Declared noise emission
according to ISO 9296
according to ISO 9296
idle* operating* *(ISO 7779)
L
WAd
(1 B = 10 dB) :
5,7 B*** 5,8 B***
L
pAm
(bystander position): 39 dB*** 40 dB***
Floor-stand (HxWxD)
473 x 286 x 775 mm
Rack (HxWxD)
177 x 483 x 770 mm;
Rack mounting depth 735 mm; 4 U
Rack mounting depth 735 mm; 4 U
Weight
25 - 40 kg (configuration dependent)
Compliance with Norm and Standards
Product safety
Global
Product safety
Global
IEC 60950-1
Europe
EN 60950-1
USA
UL 60950-1
Canada
CAN/CSA C22.2 No. 60950-1-03
Electro magnetic compatibility
This product and the released accessories, are in compliance with
emission class A. In certain cases measures have to be taken to
reduce the electro magnetic influence to other equipment.
emission class A. In certain cases measures have to be taken to
reduce the electro magnetic influence to other equipment.
Europe
EN 55022 class A, EN 55024,
EN 61000-3-3, EN 61000-3-2
EN 61000-3-3, EN 61000-3-2
Taiwan / Japan
CNS 13438 class A; VCCI class A
Australia / New Zealand AS / NZS CISPR 22 class A
USA / Canada
USA / Canada
FCC class A
Declaration of conformity
Europe (CE)
89/336/EEC(EMC);73/23 EEC(LVD)
North America
FCC class A
Approvals
Product safety
Global
Product safety
Global
CB
Europe
CE
USA / Canada
CSA
US
/ CSA
C
There is general compliance with the safety requirements of all
European countries and North America. National approvals
required in order to satisfy statutory regulations or for other
reasons, can be applied for on request.
European countries and North America. National approvals
required in order to satisfy statutory regulations or for other
reasons, can be applied for on request.
Supported operating systems
See actual release status
See actual release status
: e.g. Windows 2003;
Novell SUSE Linux Enterprise Server , Red Hat Enterprise Linux;
VMware Infrastructure (Support of Debian, Ubuntu, Mandriva Linux
and other Linux derivatives
VMware Infrastructure (Support of Debian, Ubuntu, Mandriva Linux
and other Linux derivatives
)
** For supported controllers (onboard and PCI cards for SCSI,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
*** only with standard fans and standard PSU
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
*** only with standard fans and standard PSU
Server Management (see separate data sheets)
Standard:
Standard:
PRIMERGY ServerView Suite;
PDA, ASR&R
PDA, ASR&R
Optional:
RemoteView, iRMC Advanced Pack
All rights, including rights created by patent grant or registration of a utility model or design as well
as rights of technical modifications are reserved. Delivery subject to availability. Designations may
be trademarks, the use of which by third parties for their own purposes may violate the rights of the
trademark owners.
Copyright
as rights of technical modifications are reserved. Delivery subject to availability. Designations may
be trademarks, the use of which by third parties for their own purposes may violate the rights of the
trademark owners.
Copyright
© Fujitsu Siemens Computers, 08/2007
Published by
Company stamp