Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102 사용자 설명서

A

PRIL

 2007

Download and install the tools from 

. The readme file 

that accompanies the program (or the online help for the Windows version) 

provides instructions for using the tools.

For questions regarding software configuration, operation (including how to 

perform a backup operation), or installation—contact your software provider. 

If you need to remove cartridges from the library when power is unavailable, 

either due to a general power failure or a failure of the library’s power supply, 

use one of these methods.

To remove a magazine without library power:

1.

1.

1.

1.

If your library is installed in a rack, disengage the screws securing the rails 

to the back of the rack, and slide the library forward approximately six 

inches to expose the access slots in the side of the library (see 

). 

This method is for EMERGENCY magazine removal only. If you are unsure if the 

robot was idle when the power went out, be aware that there is a chance that the 

robot was moving a cartridge into or out of the magazine. If so, the magazine will 

not manually eject, and you should not use force. Contact Tandberg Data 

Corporation Technical Support if you encounter this situation (see