Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102 사용자 설명서

1016988

6.

6.

6.

6.

Press Select. 

7.

7.

7.

7.

Press OK to perform the test.

To stop the demo, press the Stop button. The Home screen is displayed.

If a cartridge is in the tape drive when you stop the demo, the 

cartridge is unloaded.

Press Back (as needed) to return to the Home screen.

Occasionally, Tandberg Data Corporation may make revisions to the library’s 

internal code (firmware). The library’s Remote Management utility contains 

additional firmware for the Ethernet module. The Ethernet firmware may also 

be revised periodically.

You can download new firmware from 

. To upload 

new firmware to the library, you can use the library’s optional Ethernet 

interface and an FTP utility.

If you report a problem to Tandberg Data Corporation Technical Support, you 

may be asked to create a diagnostic listing (also called a dump) via FTP. A 

diagnostic listing is created when you use an FTP utility to send a copy of the 

library’s diagnostic buffer to a host computer. This information can be used by 

support personnel to troubleshoot incidents with the library.

This section describes how to connect the library to a host computer and use 

an FTP utility to upgrade library firmware and create diagnostic listings.

If you don’t want to use the library’s Remote Management utility, see 

 for information about using LibTool to upgrade firmware over 

the SCSI interface.

To use an FTP utility with the library, you must have the following:



A Category 5 (100BaseT connection) data-grade cable



Software that supports RFC 959 file transfer protocol