Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102 사용자 설명서
제품 코드
052102
A
PRIL
2007
S
TORAGE
L
OADER
2U LTO
5
L
IBRARY
C
OMPONENTS
B
ACK
P
ANEL
C
OMPONENTS
shows the back panel components of the library.
Tape Drive Cover Plate
The tape drive cover plate allows access to the tape
drive(s) for replacement, if necessary.
Ethernet Port
The Ethernet port allows you to connect the library to a
10/100BaseT Ethernet network. You can use the Ethernet connection to
perform the following activities:
Monitor library operations using its built-in Remote Management
software
Upload diagnostic information from the library using FTP
Upgrade the library’s firmware
USB Connector.
The library is equipped with a Universal Serial Bus (USB)
connector for running diagnostics or upgrading firmware.
Interface connectors
The library has either LVD SCSI tape drive(s) or a Fibre
Channel tape drive installed.
Note:
The library communicates with the host through the SCSI interface of the
tape drive(s) via the ADI serial interface. The SCSI interface as seen by the
host is the SCSI interface of the tape drive.
See the tape drive Product Manual for tape drive information.
IBM —
See Automation/Drive Interface - Command (ADC) for ADI information.
T 10 —
Figure 1-2 Library’s back panel components (SCSI configuration)
0
Ethernet port USB connector
SCSI connectors
SCSI tape drive
cover plate
cover plate