Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102 사용자 설명서

A

PRIL

 2007

One Ethernet cable is provided. You can use this cable to connect the library to an 

Ethernet network for remote monitoring, firmware upgrades, and diagnostics.
ƒ

If you want to provide your own Ethernet cable—use a shielded Category 5 

(10/100BaseT connection) data-grade cable or similar Category 5 cable that is 

compliant with EIA/TIA 568. 

ƒ

The library’s Ethernet port connector is a pin-through-hole RJ-45 shielded connector.

To comply with the regulations and standards listed in 

, all Ethernet cables 

used with the library must be properly shielded.

One European power cord is provided with the library. Refer to 

 if you plan to 

use the library outside of Europe.

Sample bar code labels for the cartridges are included with the library. If you want to 

prepare your own labels—refer to the Tandberg Data Corporation Bar Code Label 

Specification for LTO Ultrium Cartridges available at 

.

Use only data cartridges and cleaning cartridges designed specifically for LTO Ultrium 

tape drives. The LTO tape drives support the following LTO Ultrium cartridges.

Ultrium 3

Slate Blue

400 GB

Ultrium 2

Purple

200 GB

Ultrium 1 (READ only)

Black

100 GB

WORM (see 

Two-toned

400 GB

Ultrium 2

Purple

200 GB

Ultrium 1

Black

100 GB

ƒ

For maximum capacity, use Ultrium 3 data cartridges with Ultrium 3 (LTO-3) tape 

drives and Ultrium 2 data cartridges with Ultrium 2 (LTO-2) tape drives.

ƒ

Use only LTO Ultrium cleaning cartridges

You need to obtain these tools.
Tool

Phillips screwdriver–#1

Phillips screwdriver–#2

Small, flat-blade screwdriver (or similar object)

Level

Tape measure