Tandberg Data StorageLoader 2U LTO, 1 x 20 LTO-3 052103 사용자 설명서

A

PRIL

 2007

6

 The library maintains an internal database containing extensive information 

about its configuration and operations. This information is available through 

the front panel. During day-to-day operation, you typically do not need to 

access this information. However, if you need to contact Tandberg Data 

Corporation Technical Support about your library, you may be asked to check 

and report back on various settings and event results.

This chapter explains how to view the following information. 

Because the library communicates with the host through the SCSI interface of 

the tape drive(s) via the ADI serial interface, the SCSI interface seen by the 

host is the SCSI interface (SCSI ID) of the tape drive. 

Library information – library type, serial number, and  SCSI ID

Library status – fans, cable, and temperature

Library history – event logs

Library statistics – view slots, drives, and I/E port

Library settings – emulation mode, operation mode, ethernet, 

I/E port, and the display and storage settings

Tape drive information – 
ƒ

SCSI tape drive–serial number, SCSI ID, and type, and the 

tape drive designated as the SCSI interface (bridge)

ƒ

FC tape drive–NPort Address, Loop ID, Port number, and 

WWNN number

Cartridge inventory