Tandberg Data StorageLoader 2U LTO, 1 x 20 LTO-3 052103 사용자 설명서

A

PRIL

 2007

If you suspect an issue with the backup software configuration, use LibTool 

and LTOTool to first confirm that the library and tape drive are working 

properly. Download and install LibTool and LTO tool from 

. 

Use LibTool to:



Detect the library



View the library’s cartridge inventory



Move tapes into and out of the tape drive

Use LTOTool to:



Detect the tape drive



Perform a Read/Write test

The readme file that accompanies the program (or the online help for the 

Windows version) provides instructions for using LibTool and LTOTool.

For any questions regarding software configuration, contact your software 

provider. 

Before contacting Technical Support, complete the following steps to gather all 

of the required information. Having this information available before you call 

Technical Support will allow your representative to help you as efficiently as 

possible. When you have all of the required information, see 

 for contact information. 



Library serial number and firmware level. What is the library’s serial 

number? What version of firmware is currently loaded in the library? 



Check 

 for the latest release of StorageLoader 

2U LTO firmware. 



Use the operator panel to display information about the library (see 



If your library is not at the latest firmware level, use LibTool to update 

the firmware (see 

).