Tycon Systems UPS-PL1224-36 데이터 시트
Outdoor UPS Systems
Features
Weatherproof, UV resistant, outdoor enclosures
Powered over CAT5 cable using POE and/or Solar
Generous interior space for customer electronics
Wall or Pole Mounting
Isolates Customer Equipment from Power Line Surges
High Quality AGM VR Sealed Lead Acid Batteries
Advanced battery charge controller protects against overcharge and over discharge
Applications
Wireless Base Stations and Clients
Surveillance Cameras
Wireless Bridge and Repeaters
Remote Sensors
Mission critical outdoor power
Backup Power Systems
Description
The UPS
Pro™ series outdoor enclosures are designed for applications that require a backup power source in order to
maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable via Power Over
Ethernet (POE) using a POE Supply/Inserter (included). Features include an advanced battery charge controller to
protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures
have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual
buildup of hydrogen gas.
Ethernet (POE) using a POE Supply/Inserter (included). Features include an advanced battery charge controller to
protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures
have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual
buildup of hydrogen gas.
There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers,
wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line
surges which is a main cause of outdoor equipment failure.
wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line
surges which is a main cause of outdoor equipment failure.
Models are equipped with a Solar Ready controller so they can also be powered using solar panels in addition to or
instead of the POE power supply.
instead of the POE power supply.
Multiple configurations are available for 12V or 24V systems with various battery storage capacities.
A typical 250mW wireless access point with average power consumption of 3.5W will run 26 hours on a 9Ah battery at
room temperature or 17 hours at -20 deg C.
room temperature or 17 hours at -20 deg C.
DATA SHEET
UPSPro
™
Series
UPSPro™
Polycarbonate Enclosure
UPSPro™
Die Cast Enclosure