Behringer SL4210 EUROCOM SL4210 사양 시트

3

The loudspeaker shall be a professional full-range loudspeaker system in a ported composite enclosure designed for 

surface-mounting.
Driver for the loudspeaker system shall be a single 3.5" x 1.18" rectangular driver.
Enclosure for the loudspeaker system shall be constructed of low-resonance molded composite. The enclosure shall 

be finished with durable, scuff-free black or white paint. The front of the enclosure shall be protected with a detachable 

wrap-around steel wire-mesh grille with foam backing. The back of the enclosure shall have a recessed receptacle in which 

the connector shall be located.
Mounting bracket shall be supplied with the loudspeaker system. The bracket shall allow aiming in both axes 

(180 degrees pan, 90 degrees tilt). The bracket shall mount to an included wall plate.
Electronics The loudspeaker system shall also include a transformer accessable via a 5 position euroblock connector that 

sets the loudspeaker to operate at one of the supported wattages for high-impedance operation. Transformer taps at 70 V 

shall be 10, 5, 2.5 and 1.25 W. Transformer taps at 100 V shall be 10, 5, and 2.5 W.
Connection to the loudspeaker system shall be via a 5-pin Euroblock connector on the input plate.
Performance criteria met by the loudspeaker system shall include:
•  Sensitivity (1 W/1 m, half-space) of 80 dB
•  Usable frequency range (-10 dB) of 120 Hz - 20 kHz
•  Frequency response (-3 dB) of 150 Hz - 18 kHz
•  Power Handling (pink noise) of 10 W RMS
•  Maximum SPL (1 m) of 90 dB continuous and 96 dB peak
Physical characteristics of the loudspeaker system shall be:
•  Height x Width x Depth of 6 x 3.8 x 3.9" / 152 x 97 x 101.5 mm
•  Net weight of not more than 1.45 lbs / 0.66 kg
The loudspeaker system shall be the BEHRINGER EUROCOM SL4210.