Metra AX-ADXSVI-CH3 전단
INSTAX-ADXSVI-CH3
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/19/13
INSTAX-ADXSVI-CH3
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/19/13
INSTAX-ADXSVI-CH3
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/19/13
INSTAX-ADXSVI-CH3
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/19/13
AX-ADXSVI-CH3
Dodge/RAM accessory and NAV output CAN harness 2013-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems or when replacing amplified system
*Fiat 500L only: For use in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• Retains back-up camera (if through the OE radio)
• Retains the use of the 3.5mm AUX jack
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
DODGE
Dart (small screen option)
2013-up
FiAt
500L
2014-up
RAM
1500, 2500, 3500
(small screen option)
2013-up
Chassis cab 3500, 4500, 5500
(small screen option)
2013-up
APPLiCAtiONS
WiRiNG tHE AX-ADXSVi-CH3
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• For the Fiat 500L only, connect the
Blue/White wire to the amp turn on of the
aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
AX-ADXSVI-CH3
AX-ADXSVI-CH3
AX-ADXSVI-CH3
Dodge/RAM accessory and NAV output CAN harness 2013-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems or when replacing amplified system
*Fiat 500L only: For use in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• Retains back-up camera (if through the OE radio)
• Retains the use of the 3.5mm AUX jack
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
Dodge/RAM accessory and NAV output CAN harness 2013-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems or when replacing amplified system
*Fiat 500L only: For use in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• Retains back-up camera (if through the OE radio)
• Retains the use of the 3.5mm AUX jack
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
Dodge/RAM accessory and NAV output CAN harness 2013-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems or when replacing amplified system
*Fiat 500L only: For use in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• Retains back-up camera (if through the OE radio)
• Retains the use of the 3.5mm AUX jack
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
DODGE
Dart (small screen option)
2013-up
FiAt
500L
2014-up
RAM
1500, 2500, 3500
(small screen option)
2013-up
Chassis cab 3500, 4500, 5500
(small screen option)
2013-up
APPLiCAtiONS
DODGE
Dart (small screen option)
2013-up
FiAt
500L
2014-up
RAM
1500, 2500, 3500
(small screen option)
2013-up
Chassis cab 3500, 4500, 5500
(small screen option)
2013-up
APPLiCAtiONS
DODGE
Dart (small screen option)
2013-up
FiAt
500L
2014-up
RAM
1500, 2500, 3500
(small screen option)
2013-up
Chassis cab 3500, 4500, 5500
(small screen option)
2013-up
APPLiCAtiONS
WiRiNG tHE AX-ADXSVi-CH3
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• For the Fiat 500L only, connect the
Blue/White wire to the amp turn on of the
aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
WiRiNG tHE AX-ADXSVi-CH3
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• For the Fiat 500L only, connect the
Blue/White wire to the amp turn on of the
aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
WiRiNG tHE AX-ADXSVi-CH3
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• For the Fiat 500L only, connect the
Blue/White wire to the amp turn on of the
aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.