Numatic NDD-570A 전단

The DustCare Duplex 2 
motored series provides a 
100% upgrade in airflow 
performance and is 
designed to operate 
where much larger 
dust generation is 
present.  
As with the single 
motor machine 
an optional kit is 
available (NH5) to 
allow the DustCare 
machine to be 
connected directly 
to the dust collection 
hood on the 
particular hand tool 
being used.  
A perfect example of 
a Duplex application 
is the use of 
single or 
twin bladed 
wall chasers 
used on 
pre-plastered 
surfaces.  The 
dust generation 
is both fine and of high volume and requires a maximum 
performance model to provide optimum dust control at source.
For fine dust applications the MicroFlo multistage dust collection bags 
are exceptional, reaching standards previously not possible but, at the 
same time, allowing for both the clean operation and simplified emptying 
of the collected dust, just not possible with unbagged designs with 
complex, and continuously blocked, filter concepts.

The ultimate combination of operational performance 

and automatic operation in conjunction with a whole selection of work tools both in 
woodworking and stone working.  each DustCare 570 or 900 machine, be it Simplex or 
Duplex, can be fitted with our electronic Auto Control System. 
All “A” machines are equipped with an appropriate power outlet pre-fitted to the power head. 
When a hand tool is connected to this supply, the vacuum cleaner and the tool operation 
will be fully synchronized; when the tool is switched off the vacuum cleaner will purge and 

switch off automatically.  The 

converse is also true, switch 
the hand tool on and the 
vacuum cleaner switches on 

automatically.  This is vitally 

useful when machines and 

workstation are not adjacent 

to each other, ie on scaffold or 

ladders - the operation is fully 

automatic. 

 

The DustCare range has been a dedicated 

development to produce a range of professional machines addressing the needs of fine dust 
applications as found throughout the building industry.
The AirFlo and MicroFlo technology (patent applied for) has introduced an exceptional 
upgrade in both performance and dust collection and this technology has been incorporated 
into our Structofoam 570 and 
900 professional models.
The Simplex NDS single 
motor models are designed 
to be used in conjunction 
with hand tools incorporating 
vacuum hoods that produce 
low to medium fine dust volumes 
but, equally, for all cleaning 
applications including 
end cleaning of 
building sites.