ALVA FWK940300BL 사용자 설명서
AudioWare
Rackmounts
14
AudioWare
Suzy 1
Advanced Cable Adapter
MGL - MIDI Gooseneck Light
Illuminate the Inside of your Stage-Racks by using a Midi-Out/Thru - Connector
Specifications
Multi-Adapter in metal casing, unbalanced inputs
and outputs. Mute-, Mono- and Bypass-Switch.
Volume Attenuation Knob.
and outputs. Mute-, Mono- and Bypass-Switch.
Volume Attenuation Knob.
Inputs
▪ rear > 3.5 mm stereo jack
▪ rear > 2 x RCA cinch (left, right)
▪ side > 6.3 mm stereo jack
▪ side > 2 x 6.3 mm mono jack (left, right)
▪ side > 2 x XLR-3 female (left, right)
Outputs
▪ rear > 3,5 mm stereo jack
▪ rear > 2 x RCA cinch (left, right)
▪ side > 2 x 6,3 mm stereo jack
▪ side > 2 x 6,3 mm mono jack (left, right)
▪ side > 2 x XLR-3 male (left, right)
Options
▪ Button “Mute”: Mutes signal
▪ Button “Mono”: Incoming signal to mono
▪ Button “Bypass”: Deactivates volume knob
Specifications
▪ Length: 150 mm (MGL1) / 350 mm (MGL2)
▪ Connector: 1x DIN 5-pin (Midi output)
▪ Also usable to illuminate your sheet music at the keyboard.
Incompatible Cable? Plugs don´t fit? Suzy adapts
all standard analogue audio cable plugs. Incoming
signals are distributed to all outputs. All connection
work unbalanced.
all standard analogue audio cable plugs. Incoming
signals are distributed to all outputs. All connection
work unbalanced.
Attention: Suzy does not merge or mix signals!
A simple idea - makes it so easy. Just plug it into a midi-connector
of a mounted unit of your rack (OUT or THRU) - and the LED will
light up and helps you when you need to look into the backside
of a rack on dark stages, studios etc..
of a mounted unit of your rack (OUT or THRU) - and the LED will
light up and helps you when you need to look into the backside
of a rack on dark stages, studios etc..
Rackmounts
15
Rackmount RM19
Unirack 19 II
Applicable with RME
Fireface 400
Multiface 2
ADI-2
Applicable with e. g. RME
Fireface 400, Multiface 2,
Multiface, Digiface
QuadMic, AD-4 DD
ADI-2
Rackmount adaptor to mount half 19”
RME units into a 19” rack.
RME units into a 19” rack.
Just remove the factory-mounts and
replace them with the RM19.
replace them with the RM19.
4x screws M4 x 8 are included.
19”/1U Universal Rackmount Unit for
non 19” units like e. g.: RME Multiface,
Multiface II, Quadmic, ADI-2, Fireface
400, ADI-4 DD and many other units.
non 19” units like e. g.: RME Multiface,
Multiface II, Quadmic, ADI-2, Fireface
400, ADI-4 DD and many other units.
The Unirack II comes with updated drill
holes, reduced weight, and improved
handling. The oplong holes from left to
right can be used with cable-straps as
strain-relief, the ones from front to rear
to mount e. g. AC-adaptors.
holes, reduced weight, and improved
handling. The oplong holes from left to
right can be used with cable-straps as
strain-relief, the ones from front to rear
to mount e. g. AC-adaptors.
4 screws M3 x 5 are included.
Dimensions (W x H x D):
44,5cm x 4,6 cm x 22,5 cm.
AudioW
ar
e
Rack
moun
ts
Part No: Suzy 1
Part No: MGL1 / MGL2