Intellinet 560566 사용자 설명서

다운로드
페이지 3
 
  
1-Port Gigabit High-Power PoE Injector
1 x 30 W, IEEE 802.3at/af Power over Ethernet (PoE+/PoE)
Part No.: 
560566
Reduce costs by using existing Cat5 cable to provide both power and data.
The Intellinet 1-Port Gigabit High-Power PoE Injector allows you to connect your IEEE
802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to
connect a wireless access point, IP phone, network camera or any IEEE
802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to
30 Watts. That's enough for even power-hungry PoE devices.
Reduce Wiring Costs
No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE
Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Protect Your Equipment
Now that you are running DC power to your networked equipment through the Cat5e/6 cabling, you need to be sure that
the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits
(short GRND), current overloads and high voltages.
Features:
Save time and money by delivering data and power via existing network cables
Power output of up to 30 Watts
Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and
bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
Three-Year Warranty
Specifications:
Standards
» IEEE 802.3af (Power over Ethernet)
» IEEE 802.3at (High-Power PoE+ Power over Ethernet)
» IEEE 802.3 (10Base-T Ethernet)
» IEEE 802.3ab (Gigabit Ethernet)
» IEEE 802.3u (100Base-TX Fast Ethernet)
General
» Media support:
- 100Base-TX Cat5 UTP/STP RJ45, 8 pin
- 1000Base-T Cat5e UTP/STP RJ45, 8 pin
» Ports:
- 1 RJ45 1000 Mbps input port
- 1 RJ45 1000 Mbps data and power output port
- 1 power input connector for external power adapter
» Protection functions:
- Short circuit protection for short GND
- Overload protection for currents over 1.8 A
- High-voltage protection for output voltage exceeding 58 V
» Compatibility - general: all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices
» Supported INTELLINET NETWORK SOLUTIONS products:
- Wireless 300N Access Points (524735, 524711, 525251)
- IEEE 802.3at PoE+ Splitter (560443)
For more information on INTELLINET products, consult your local dealer or visit www.intelllinet-network.com.
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and
reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.