Bosch RF835E 4.998.121.486 사용자 설명서
제품 코드
4.998.121.486
Intrusion Alarm Systems | RF835 Wireless TriTech Detectors
RF835 Wireless TriTech Detectors
www.boschsecurity.com
u
11m x 11m (35 ft by 35 ft) coverage
u
Up to 45Kg (100 lb.) Pet Immunity
u
Flexible Mounting Height
u
Compatible with Bosch premises wireless systems
u
Draft and Insect immune
The RF835 Wireless TriTech PIR/Microwave Detectors
use artificial intelligence to detect motion and provide
immunity to false alarms caused by pets or animals. An
integral RF transmitter reports low battery and tamper
status, and sends a supervisory signal to the control
panel.
use artificial intelligence to detect motion and provide
immunity to false alarms caused by pets or animals. An
integral RF transmitter reports low battery and tamper
status, and sends a supervisory signal to the control
panel.
Functions
Signal Processing
Uses passive infrared and microwave technologies to
provide an alarm condition when both fields of
protection are simultaneously activated. Alarm signals
must meet the signaling requirements of both
technologies to activate an alarm. Microwave range is
factory set, but can be adjusted if desired.
provide an alarm condition when both fields of
protection are simultaneously activated. Alarm signals
must meet the signaling requirements of both
technologies to activate an alarm. Microwave range is
factory set, but can be adjusted if desired.
PIR Signal Processing
Motion Analyzer II uses multiple thresholds and timing
windows to analyze timing, amplitude, duration, and
polarity of signals to make an alarm decision. The
detectors tolerate extreme levels of heat and light
from heaters and air conditioners, hot and cold drafts,
sunlight, lightning, and moving headlights. There are
three sensitivity settings.
windows to analyze timing, amplitude, duration, and
polarity of signals to make an alarm decision. The
detectors tolerate extreme levels of heat and light
from heaters and air conditioners, hot and cold drafts,
sunlight, lightning, and moving headlights. There are
three sensitivity settings.
Microwave Signal Processing
Adaptive processing adjusts to background
disturbances. This helps to reduce false alarms while
maintaining catch performance.
disturbances. This helps to reduce false alarms while
maintaining catch performance.
Test Features
Externally visible, tri-color alarm LED indicates each
technology independently.
technology independently.
Supervised Microwave
Patented fully supervised microwave circuitry provides
single technology coverage in the event the microwave
subsystem fails.
single technology coverage in the event the microwave
subsystem fails.
Pet Immunity
The detector is able to distinguish between signals
caused by humans and signals caused by pets such as
a dog up to 45 kg (100 lb) or two dogs at 27 kg
(60 lb) or up to ten cats. This provides immunity to
false alarms while maintaining proper catch
performance of human targets.
caused by humans and signals caused by pets such as
a dog up to 45 kg (100 lb) or two dogs at 27 kg
(60 lb) or up to ten cats. This provides immunity to
false alarms while maintaining proper catch
performance of human targets.
Draft and Insect Immunity
The sealed optical chamber provides immunity to
drafts and insects.
drafts and insects.
Temperature Compensation
The sensor adjusts its sensitivity to maintain
consistent catch performance at critical temperatures.
consistent catch performance at critical temperatures.