Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES 사용자 설명서

b.  Select the Enable Wireless Bridging check box. The Local MAC Address field is a 

nonconfigurable field that shows the MAC address of the wireless access point.

c.  Select the Wireless Point-to-Multi-Point Bridge radio button. The screen adjusts.

d.  The profile table shows four security profiles. Choose a security profile to edit by 

selecting the corresponding radio button to the left of the profile.

e.  Click Edit to configure the selected security profile settings. The Edit Security Profile 

screen displays for the selected security profile. (The following figure contains some 
examples.)

f.  Specify the settings as explained in the following table:

Profile Name

Enter a profile name that is easy to remember. The default names for the four 
security profiles are NETGEAR-WDS-1, NETGEAR-WDS-2, 
NETGEAR-WDS-3, and NETGEAR-WDS-4.

Remote MAC Address

Enter the MAC address of the remote wireless access point (the MAC 
address of AP2 or AP 3 on LAN Segment 1 in 

 on page 94).