Supermicro PDSM4+-B 사용자 설명서

This manual is written for system integrators, PC technicians and 

knowledgeable PC users.  It provides information for the installation and use of 

the 

 PDSM4+/PDSME+ motherboard. The PDSM4+/PDSME+ supports 

single Intel Core 2 Duo/E6000/Xeon 3000 Series/Pentium D  (Dual-Core)/Pentium 

4 Extreme Edition/Pentium 4/Celeron D LGA (Land Grid Array) 775 Processors at 

system bus speeds of 1066 MHz/800 MHz/533 MHz.  The LGA 775 Core 2 Duo/

E6000/Xeon 3000 Series/Pentium D /Pentium 4/Celeron D Processor is housed in a 

Flip-Chip Land Grid Array (FC-LGA4) package that interfaces with the motherboard 

via an LGA775 socket. The PDSM4+/PDSME+ supports the Intel Hyper-Threading 

(HT) Technology, the EM64T Technology, the Enhanced Intel SpeedStep Technol-

ogy (EIST) and the Matrix Storage Technology.  Please refer to the motherboard 

specifi cations pages on our web site (http://www.supermicro.com/Product) for 

updates or visit Intel's web site for processor support. This product is intended to 

be professionally installed.    

Chapter 1 describes the features, specifi cations and performance of the mainboard 

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions.  Read this chapter when 

installing the processor,  memory modules and other hardware components into 

the system. 

If you encounter any problems, see Chapter 3, which describes troubleshooting 

procedures for the video, the memory and the system setup stored in CMOS. 

Chapter 4 includes an introduction to BIOS and provides detailed information on 

running the CMOS Setup utility.

Appendix A and Appendix B provide BIOS POST Messages and POST Codes. 

Appendix C, Appendix D and Appendix E list  HostRAID Setup Guidelines and 

Other Software Driver and Program Installation Instructions.

Special attention should be given to the following symbols for proper installation and 
to prevent damage done to the components or injury to yourself: 

Danger/Caution:  Instructions to be strictly followed to prevent catastrophic 

system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation or 

to prevent damage to the components.

Note: Additional Information given to differentiate various models or to ensure cor-

rect system setup.

Preface

iii