Rigol DS2202A 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A 사용자 설명서
제품 코드
DS2202A
RIGOL
DS2000A User’s Guide
10-2
Waveform Record
Waveforms from both the channels currently turned on will be recorded during
waveform record.
Press Utility Record Mode and use
to select “Record” to open the
waveform record operation menu.
1. End Frame
1. End Frame
Press End Frame and use
to set the desired number of frames to be
recorded. The number of frames available is related to the memory depth
currently selected.
currently selected.
2. Record Operation
Waveform recod can be realized via the menu or the shortcut buttons at the
front panel.
front panel.
Menu
Front Panel
Press Operate and select
“●” to start recoding.
“●” to start recoding.
Press
; the backlight goes on (in red)
and starts to flash, indicating that the
record is started.
record is started.
When the record is finished,
“●” changes to “■”
automatically. You can also
select “■” manually.
“●” changes to “■”
automatically. You can also
select “■” manually.
When the recod is finished,
goes off
automatically and
goes on (in
orange). You can also press
directly.
3. Interval
Set the time interval between the frames in waveform record and the range
available is from 100 ns to 10 s.
available is from 100 ns to 10 s.
4. Total Frames
The menu shows the maximum number of frames that can be recorded
currently.
currently.