Rigol DS2302A-S 2-channel oscilloscope, Digital Storage oscilloscope, DS2302A-S 사용자 설명서
제품 코드
DS2302A-S
RIGOL
DS2000A User’s Guide
13-5
Internal Storage and Recall
Internal storage and recall support “Setups” in Storage. In the following part, the
storage and recall method and procedures are introduced.
1. Save the specified oscilloscope setting in internal memory.
1) Connect the signal to the oscilloscope and obtain stable display.
2) Press Storage Storage to select “Setups” and press Save to turn on the
2) Press Storage Storage to select “Setups” and press Save to turn on the
interface as shown in Figure a. use
to select “Local Disk” (the characters
turn green) and press down
to open the local disk (Figure b).
Figure a
3) As shown in Figure b, the local disk can store at most 10 setting files. Use
to select the desired storage position, Save is illuminated and then
press the softkey to execute the saving operation. If the current position
contains a file, the original file can be overwritten or be delected by pressing
Delete. Use
contains a file, the original file can be overwritten or be delected by pressing
Delete. Use
to select
and then press down
to return to
the previous directory.
Figure b