Rigol DS1074Z 4-channel oscilloscope, Digital Storage oscilloscope, DS1074Z 사용자 설명서
제품 코드
DS1074Z
RIGOL
DS1000Z User’s Guide
6-3
Substraction
Subtract the waveform voltage values of signal source B from that of source A point
by point and display the results.
Press MATH Math Operator to select “A-B”:
Press Display to turn on or off the subtraction operation function.
Press Source A and Source B to select the desired channels (CH1, CH2, CH3 or
CH4).
Press Offset and use
to adjust the vertical offset of the operation result.
Press Scale and use
to adjust the vertical scale of the operation results.
Press Scale Reset, the instrument will adjust the vertical scale to the best value
according to the current configration automatically.
Press Options to set the start point, end point or turn on or off the inverted
display of the operation results.
Press Start to set the start point of the operation results.
Press End to set the end point of the operation results.
Press Invert to turn the inverted display of the operation results on or off.
Press Auto Scale to turn on or off the auto scale function. When “ON” is
selected, the instrument will adjust the vertical scale to the best value according
to the current configration automatically.
Press Start to set the start point of the operation results.
Press End to set the end point of the operation results.
Press Invert to turn the inverted display of the operation results on or off.
Press Auto Scale to turn on or off the auto scale function. When “ON” is
selected, the instrument will adjust the vertical scale to the best value according
to the current configration automatically.
HORIZONTAL POSITION and HORIZONTAL SCALE can also be
used to adjust the horizontal position and scale of the operation results.
Multiplication
Multiply the waveform voltage values of signal source A and B point by point and
display the results.
Press MATH Math Operator to select “A×B”:
Press Display to turn on or off the multiplication operation function.
Press Source A and Source B to select the desired channels (CH1, CH2, CH3 or
CH4).
Press Offset and use
to adjust the vertical offset of the operation result.