Lecroy WaveStation 2052 Function Generator, Frequency Generator WaveStation 2052 사용자 설명서
제품 코드
WaveStation 2052
Operator's Manual
WSta-OM-E RevA
21
Waveform Types and Default Parameters
Provided your WaveStation is powered on, a single waveform type is
always selected and only one waveform type is selected at a time. Each
waveform type (Sine, Square, Ramp, Pulse, Noise, and Arb) contains
default parameters when initially selected.
always selected and only one waveform type is selected at a time. Each
waveform type (Sine, Square, Ramp, Pulse, Noise, and Arb) contains
default parameters when initially selected.
Note: When using WaveStation (or any signal generator) it's important
to understand the relationship between the Main Waveform Type
buttons, the Waveform Signal Conditioning function buttons, and the
Save/Recall, Utility, and Help function buttons. See Combined Use of
Waveform, Function, and Configuration Buttons (on page 23).
to understand the relationship between the Main Waveform Type
buttons, the Waveform Signal Conditioning function buttons, and the
Save/Recall, Utility, and Help function buttons. See Combined Use of
Waveform, Function, and Configuration Buttons (on page 23).
Select waveform types by pressing the corresponding waveform button
on the Front Panel (on page 13).
on the Front Panel (on page 13).
1. Sine - The default Sine waveform is set to 1 kHz frequency, 4.0 Vpp
amplitude and a 0V dc offset. The WaveStation can produce 1 μHz
up to 50 MHz (WaveStation 2052) Sine waves.
up to 50 MHz (WaveStation 2052) Sine waves.
2. Square - The default Square waveform is set to 1 kHz frequency,
4.0 Vpp amplitude, 0V dc offset with a 50% duty cycle. The
WaveStation can produce 1 μHz to 25 MHz with variable duty
cycle Square waves.
WaveStation can produce 1 μHz to 25 MHz with variable duty
cycle Square waves.
3. Ramp - The default Ramp waveform is set to 1 kHz frequency, 4.0
Vpp amplitude, 0V dc offset with a 50% symmetry. The
WaveStation can produce 1 μHz to 300 kHz with variable
symmetry Ramp waves.
WaveStation can produce 1 μHz to 300 kHz with variable
symmetry Ramp waves.
4. Pulse - The default Pulse waveform is set to 1 kHz frequency, 4.0
Vpp amplitude, 0V dc offset, 200 μs pulse width. The WaveStation
can produce 500 μHz to 5 MHz with variable pulse width and delay
Pulse waves.
can produce 500 μHz to 5 MHz with variable pulse width and delay
Pulse waves.
5. Noise - The default Noise waveform is set to 2.0V Variance and 10
mV Mean. The WaveStation can produce signal bandwidth up to
50 MHz for Noise waves.
50 MHz for Noise waves.
6. Arb - The default Arb waveform is set to 1 kHz frequency, 4.0 Vpp
amplitude and 0mV dc offset. The WaveStation can produce
repeatable arbitrary waveform signals with a 16K point maximum
and a 5 MHz frequency.
repeatable arbitrary waveform signals with a 16K point maximum
and a 5 MHz frequency.