LSI LSI00049-F MegaRAID 8480E 8 Port SAS RAID Controller - 256MB LSI00049-F 사용자 설명서
제품 코드
LSI00049-F
®
Thank you for purchasing the MegaRAID SAS 8480E RAID
Controller. Please take a few minutes to read this quick
installation guide before you install the RAID controller. If you
need more information about any topic covered in this guide,
refer to the other documents on your MegaRAID Universal
Software Suite CD.
Controller. Please take a few minutes to read this quick
installation guide before you install the RAID controller. If you
need more information about any topic covered in this guide,
refer to the other documents on your MegaRAID Universal
Software Suite CD.
If your MegaRAID SAS 8480E RAID Controller appears to be
damaged, or if the MegaRAID Universal Software Suite CD
is missing, contact LSI Logic or your MegaRAID OEM
support representative.
damaged, or if the MegaRAID Universal Software Suite CD
is missing, contact LSI Logic or your MegaRAID OEM
support representative.
M e g a R A I D S A S 8 4 8 0 E R A I D C O N T R O L L E R
I N S T A L L A T I O N
I N S T A L L A T I O N
Perform the following steps to install the MegaRAID SAS
8480E RAID Controller:
8480E RAID Controller:
Step 1
Unpack the MegaRAID SAS 8480E RAID
Controller
Controller
Unpack the MegaRAID SAS 8480E RAID
Controller in a static-free environment. Remove
the controller from the antistatic bag and inspect
it for damage.
Controller in a static-free environment. Remove
the controller from the antistatic bag and inspect
it for damage.
If the MegaRAID SAS 8480E RAID Controller
appears to be damaged, or if the MegaRAID
Universal Software Suite CD is missing, contact
appears to be damaged, or if the MegaRAID
Universal Software Suite CD is missing, contact
LSI Logic or your MegaRAID OEM support
representative.
representative.
The CD contains utility programs, device drivers
for various operating systems, and the following
documentation:
for various operating systems, and the following
documentation:
•
MegaRAID SAS Storage Adapters User’s
Guide
Guide
•
MegaRAID SAS Software User’s Guide
•
MegaRAID SAS Device Driver Installation
User’s Guide
User’s Guide
•
Software license agreement
Step 2
Prepare the Computer
Turn off the computer and unplug the power
cord(s) from the back of the power supply.
Remove the cover from the chassis.
cord(s) from the back of the power supply.
Remove the cover from the chassis.
Step 3
Review the Jumpers and Connectors
shows the location of the jumpers and
connectors on the MegaRAID SAS 8480E RAID
Controller. The jumpers are set at the factory and
you usually do not need to change them.
Controller. The jumpers are set at the factory and
you usually do not need to change them.
Figure 1 MegaRAID SAS 8480E RAID Controller
Card Layout
Make a backup of your data before you change
your system configuration to ensure no loss of
data.
your system configuration to ensure no loss of
data.
!
CAUTION
Make sure the computer is disconnected from the
power and from any networks before installing
the controller.
power and from any networks before installing
the controller.
!
CAUTION
J2
J5
J6
J7
J8
J12
J11
J3
Ports
0 – 3
J9
Ports
4 – 7
J4
U6
U12
P1
LSI Logic MegaRAID
®
SAS 8480E
RAID Controller
Quick Installation Guide