Supermicro X7DA3-B 사용자 설명서
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of
the
X7DA3 motherboard. The
X7DA3 supports dual Intel Quad-
Core/Dual-Core Xeon Processors with a front side bus speed of 667 MHz/1.066
GHz/1.333 GHz. With dual 64-bit Quad-Core/Dual-Core processors built-in, the
X7DA3 offers substantial functionality enhancements to the motherboards based on
Intel Core and NetBurst microarchitectures while remaining compatible with the IA-
32 software. The features include Intel Hyper-Threading Technology, Virtualization
Technoogy, Hyper Pipelined Technology, Execution Trace Cache, Thermal Moni-
tor 1/2 (TM1/TM2), Enhanced Intel SpeedStep technology, Advanced Dynamic
Execution, Advanced Transfer Cache, Streaming SIMD Extensions 3 (SSE3) and
Extended Memory 64 Technology (EM64T). These features allow the motherboard
to operate at much higher speeds with better power management in much safer
thermal environments than the traditional motherboards. The X7DA3 is ideal for high
performance dual processor (DP) workstation and enterprise server environments.
Please refer to the motherboard specifi cations pages on our web site (http://www.
supermicro.com/Products) for updates on supported processors. This product is
intended to be professionally installed.
Manual Organization
Chapter 1 describes the features, specifi cations and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for the video, the memory and the system setup stored in
CMOS.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A and Appendix B provide BIOS POST Messages and POST Codes.
Appendix C, Appendix D and Appendix E list HostRAID, Windows OS and Other
Software Program Installation Instructions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installation
or to prevent damage to the components.
Note: Additional Information given to differentiate various models or to ensure cor-
rect system setup.
iii
Preface