Tivoli Audio Bathroom Radio, White M10PFW 데이터 시트

13 – ENGLISH

The alarm sounds with a gradual volume increase. When the alarm sounds you can activate the 
Snooze feature or shut the alarm off.

Alarm off: To stop the alarm while it is sounding, press the Alarm or Power button on remote, or 
press and hold the Multi-Function Control Wheel on top of the unit.
Snooze: To activate Snooze while the alarm is sounding, press the Snooze button on the remote, or 
briefly press the Multi-Function Control Wheel on top of the unit. The Snooze time is not adjustable. 
Note: When in snooze mode, you can see the remaining snooze time by pressing the Snooze 
button on the remote. If you press the Alarm or Power button on the remote, or if you press the 
Multi-Function Control Wheel on top of the unit, then the snooze countdown will be cancelled.

Press and hold the Menu button on the remote to enter the main menu. Use the pq buttons 
and the Select button to change the items within the menu. Use the Back button to navigate 
back, or wait for 15 seconds until the timeout expires.
An asterisk (*) indicates the shown menu item is currently set.
Note: Upon entering Digital radio mode, if the Station list is empty, an auto scan will initiate.
1.  AUTO SCAN: Searches the entire frequency range. If you move the Model 10+ to another 

location, you must perform a new scan so the radio will find stations in the new location. To 
cancel the auto scan, press the Back button on remote.

2.  TIVOLI EQ: Please refer to section marked “Menu and specific features”.
3.  MANUAL TUNE: Press the pq buttons to manually tune specific DAB/DAB+/DMB  

frequencies, then press Select to tune the displayed frequency.

4.  DRC: Dynamic Range Control allows you change the sound level of stations to make  

quiet passages louder to compensate for a noisy environment, or when listening at a low  
volume level.

5.  ADVANCED MODE: If the Model 10+ is relocated to a different area, you may find stations 

with the same name. If you enable “Advanced View”, “Long labels”, and “Show Ensemble” 
under Advanced Mode, you will be able to differentiate between extended station names.
For DAB/DAB+, we suggest disabling all the Advanced Mode settings. For DMB, we suggest 
enabling them.

6.  UPDATE LIST: If the Model 10+ is relocated to a different area, some stations may become 

unavailable. Select “Update List” to remove unavailable stations from the Station list. Use the pq 
or t u buttons and the Select button to confirm (Yes) or deny (No) removing unavailable stations.

Secondary Services: Secondary stations will be indicated by a >> symbol next to the station 
name. Secondary services may not be available in your area. 

”: If this symbol appears next to the station name, it means the station is invalid or inactive. 

“Not Available”: Shown when tuning a DAB station with an insufficient signal.