Phoenix Contact Solenoid driver MACX MCR-EX-SL-SD-24-48-LP-SP 2924126 2924126 데이터 시트
제품 코드
2924126
Nov 14, 2013 1 / 6
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
The illustration shows the
versions with screw connection
Ex-i solenoid driver. For controlling Ex-i solenoid valves, alarm modules or LEDs installed in Ex
areas. Current limitation at 48 mA. For gases up to Group II C, loop-powered, electrical isolation, SIL
3.
Product Features
Mechanically compatible with the DIN rail connector
Various output characteristic curves compatible with standard solenoid valves
Loop-powered: the required power is supplied via the control signal on the input side.
Up to SIL 3 according to EN 61508
Installation in zone 2, protection type "n" (EN 60079-15) permitted
20
Various output characteristic curves compatible with standard solenoid valves
Loop-powered: the required power is supplied via the control signal on the input side.
Up to SIL 3 according to EN 61508
Installation in zone 2, protection type "n" (EN 60079-15) permitted
20
30 V DC input
2-way electrical isolation
Output [Ex ia] IIC/[Ex ia] IIB
Output [Ex ia] IIC/[Ex ia] IIB
Key commercial data
package_quantity
1
GTIN
4046356338486
Technical data
Dimensions
Width
12.5 mm
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
10 % ... 95 % (no condensation)
Degree of protection
IP20
Output data
Minimum output voltage
10.5 V DC (At 48 mA)