Mentor Push button cap with label insert 2271.4011 Push button caps White (diffuse) Compatible with MENTOR 1254 and OMRO 2271.4011 데이터 시트
제품 코드
2271.4011
12
Tastkappe und Leuchtfeld für
individuelle Beschriftungseinlage
individuelle Beschriftungseinlage
Pushbutton cap and signal indicator
for individual inscription inserts
for individual inscription inserts
Building on the principle of the
well-known MENTOR pushbut-
ton caps, the „pushbutton cap
for individual inscription inserts“
consists of a standard 2-compo-
nent housing, a modified diffuser
cover and an additional panel for
clipping on.
The perfect synthesis of the struc-
tural components ensures excepti-
onally homogeneous il-lumination
of the pushbutton – and that with
the use of just two LEDs, although
it is of course possible to use up
to four LEDs.
well-known MENTOR pushbut-
ton caps, the „pushbutton cap
for individual inscription inserts“
consists of a standard 2-compo-
nent housing, a modified diffuser
cover and an additional panel for
clipping on.
The perfect synthesis of the struc-
tural components ensures excepti-
onally homogeneous il-lumination
of the pushbutton – and that with
the use of just two LEDs, although
it is of course possible to use up
to four LEDs.
The housing body and the diffuser cover are preassembled, with the
panel being supplied separately. The individual pushbutton caps and
signal indicators are inscribed by means of a membrane insert, on
which numbers, letters or symbols can be printed, for example –
tailor-made to the customer‘s wishes. The printed membrane is
inserted between the diffuser cover and the panel and is therefore
securely protected against abrasion and external influences.
While the classic MENTOR pushbutton caps are conceived for use in
membrane keypads, this version is operated directly on the front panel
without film lamination.
panel being supplied separately. The individual pushbutton caps and
signal indicators are inscribed by means of a membrane insert, on
which numbers, letters or symbols can be printed, for example –
tailor-made to the customer‘s wishes. The printed membrane is
inserted between the diffuser cover and the panel and is therefore
securely protected against abrasion and external influences.
While the classic MENTOR pushbutton caps are conceived for use in
membrane keypads, this version is operated directly on the front panel
without film lamination.
In the case of the SMD assembly with pushbuttons and LEDs, duo or
RGB LEDs are also possible, so that the customer can put together a
tailor-made solution. A possible selection of suitable LEDs and push-
buttons can be found on the following catalogue pages, with it also
been possible to combine models from other manufacturers.
RGB LEDs are also possible, so that the customer can put together a
tailor-made solution. A possible selection of suitable LEDs and push-
buttons can be found on the following catalogue pages, with it also
been possible to combine models from other manufacturers.
The pushbutton caps and adequate signal indicators are offered with
an individual inscription insert in the standard size of 15 x 15 mm,
as well as in the two heights of 13.0 mm and 15.8 mm. Upon request
special versions are also possible – please contact us.
an individual inscription insert in the standard size of 15 x 15 mm,
as well as in the two heights of 13.0 mm and 15.8 mm. Upon request
special versions are also possible – please contact us.
Auf dem Prinzip der bekannten
MENTOR Tastkappen aufbauend,
setzt sich die „Tastkappe für indi-
viduelle Beschriftungseinlage“ aus
einem Standard 2-Komponenten-
Gehäuse, einer modifizierten
Streuscheibe plus zusätzlicher
Blende zum Aufclipsen zusammen.
Die perfekte Synthese der Aufbau-
komponenten sorgt für eine aus-
gesprochen homogene Ausleuch-
tung der Tastfläche – und dies
durch den Einsatz von lediglich
zwei LEDs, wobei selbstverständ-
lich auch bis zu vier LEDs einge-
setzt werden können.
MENTOR Tastkappen aufbauend,
setzt sich die „Tastkappe für indi-
viduelle Beschriftungseinlage“ aus
einem Standard 2-Komponenten-
Gehäuse, einer modifizierten
Streuscheibe plus zusätzlicher
Blende zum Aufclipsen zusammen.
Die perfekte Synthese der Aufbau-
komponenten sorgt für eine aus-
gesprochen homogene Ausleuch-
tung der Tastfläche – und dies
durch den Einsatz von lediglich
zwei LEDs, wobei selbstverständ-
lich auch bis zu vier LEDs einge-
setzt werden können.
Der Gehäusekorpus und die diffuse Streuscheibe werden vormontiert,
die Blende separat geliefert. Die individuelle Beschriftung der Tast-
kappen und Leuchtfelder erfolgt über Folieneinleger, auf die z. B. Zif-
fern, Buchstaben oder Symbole gedruckt werden können – ganz nach
Wunsch des Kunden. Die bedruckte Folie wird zwischen Streuscheibe
und Blende eingelegt und ist damit sicher vor Abrieb und äußeren
Einflüssen geschützt.
Während die klassischen MENTOR Tastkappen für den Einsatz in Folien-
tastaturen konzipiert sind, wird diese Variante ohne Folienkaschierung
direkt auf der Frontplatte bedient.
die Blende separat geliefert. Die individuelle Beschriftung der Tast-
kappen und Leuchtfelder erfolgt über Folieneinleger, auf die z. B. Zif-
fern, Buchstaben oder Symbole gedruckt werden können – ganz nach
Wunsch des Kunden. Die bedruckte Folie wird zwischen Streuscheibe
und Blende eingelegt und ist damit sicher vor Abrieb und äußeren
Einflüssen geschützt.
Während die klassischen MENTOR Tastkappen für den Einsatz in Folien-
tastaturen konzipiert sind, wird diese Variante ohne Folienkaschierung
direkt auf der Frontplatte bedient.
Bei der SMD-Bestückung mit Tastern und LEDs, auch Duo- oder
RGB-LEDs sind möglich, kann sich der Kunde eine maßgeschneiderte
Lösung zusammenstellen. Eine mögliche Auswahl passender LEDs und
Taster ist auf den folgenden Katalogseiten zu finden, andere Herstel-
lermodelle sind ebenso zu kombinieren.
RGB-LEDs sind möglich, kann sich der Kunde eine maßgeschneiderte
Lösung zusammenstellen. Eine mögliche Auswahl passender LEDs und
Taster ist auf den folgenden Katalogseiten zu finden, andere Herstel-
lermodelle sind ebenso zu kombinieren.
Angeboten werden die Tastkappen und passenden Leuchtfelder mit
individueller Beschriftungseinlage in der Standardgröße 15 x 15 mm
sowie in den zwei Höhen von 13,0 mm und 15,8 mm. Auf Anfrage sind
auch Sondervarianten möglich – sprechen Sie uns an.
individueller Beschriftungseinlage in der Standardgröße 15 x 15 mm
sowie in den zwei Höhen von 13,0 mm und 15,8 mm. Auf Anfrage sind
auch Sondervarianten möglich – sprechen Sie uns an.