Beurer Microdermabrasion 606.66 사용자 설명서

15

8. If the lowest intensity level is not strong enough for you, you can change this by 

pressing the -/+ buttons.

The pressure you apply when using the device should be comfortable and not painful. Some slight reddening should 

be expected after use.

9. When you have finished using the device, press the ON/OFF button to switch it off and unplug the mains adapter 

from the socket.

10.  Change the single-use filter after every use. To do this, disconnect the hand-held 

device from the tube. Use tweezers to remove the single-use filter.

You can do this by pulling the skin taut to the side or downwards with your free hand.

Move the hand-held device slowly and evenly outwards from the centre of the forehead. 

Make sure that you do not treat any part of your skin more than once. 

Move the hand-held device outwards towards your hairline. Repeat this to the left and right 

of the nose. Ensure that the device is at least 1 cm away from your eyes.

Move the hand-held device downwards from the centre at the top of the bridge of your nose. 

Repeat this to the left and right of the nose. 

Move the hand-held device outwards across your cheeks. 

Move the hand-held device along your upper lip from the centre to the left and right. Move 

the hand-held device upwards from your bottom lip to the left and right. Make sure that you 

do not touch your lips.