TP-LINK CPE510 사용자 설명서
Chapter 9 Tools
Chapter 9
Tools List
This device provides some useful tools including Ping, Traceroute, Speed Test, Survey and Spectrum
Analysis.
Analysis.
Ping
Ping test function is used to test the connectivity and reachability between the device and the target host
so as to locate the network malfunctions.
so as to locate the network malfunctions.
Destination IP/Domain
Enter the IP address of the destination node for Ping test. Click Start, the
device will send Ping packets to test the network connectivity and reachability
of the host and the results will be displayed in the list below.
device will send Ping packets to test the network connectivity and reachability
of the host and the results will be displayed in the list below.
Packet Count
Enter the number of packets to be sent during the testing. It can be 1 to 50 and
the default is 4.
the default is 4.
Ping Timeout
Enter a time value to wait for a response. It can be 100-2000 milliseconds. The
default value is 800 milliseconds.
default value is 800 milliseconds.
- 83 -