Gigabyte Motherboard GA-EP35-DS4 GA-EP35-DS4 사용자 설명서

GA-EP35-DS4 Motherboard

- 102 -

Before DTS is enabled, you would get only 2-channel output signals (from the
front speakers) when playing 2-channel music. You must play 4-, 5.1-, or
7.1- channel music sources to produce 4-, 5.1-, or 7.1- channel audio effects.

DTS control button

With DTS enabled, the system will transform two-channel stereo source material into multi-channel
audio output, creating a virtual surround sound environment

(Note)

.

After installing the audio driver, at the center bottom of the Audio Control
Panel, you should find the DTS control button as shown below:

1.

 : This button provides you more controls over "dts NEO:PC".

      

 Music Mode ; 

 Cinema Mode

2.

 "dts NEO : PC" :

Press this button to enable or disable the dts NEO : PC function.
Enabling dts NEO : PC allows the system to transform ordinary 2-channel stereo content into 4-,
5.1-, or 7.1- channel surround sound, depending on your speaker configurations.

3.

 "dts INTERACTIVE" :

If your surround sound system is connected via an external decoder, click the Audio I/O tab in the
Audio Control Panel. Either click DTS Interactive in the upper left list or click the dts INTERAC-
TIVE button at the center bottom of the Audio Control
Panel. And click the dts  NEO : PC button. The
system will then simulate 5.1 channel surround
sound playback from two-channel content.

(Note) When DTS Interactive is enabled, only digital auio output (S/PDIF) is working, and you will

not hear sound from analog speaker or headphone.