Antec Micro Fusion 350 mATX Aluminium MICRO FUSION 350 EC 사용자 설명서

1

At Antec, we continually refine and improve our products to ensure the highest 
quality. As such, your new case may differ slightly from the description in this 
manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, 
all features, descriptions, and illustrations in this manual are correct.

The MicroFusion 350 comes with a 350-Watt power supply that features univer-
sal input. This includes dual 12V output rails that deliver safer and more reliable 
output to the system’s components, and generates at higher energy efficiency, 
reducing power consumption by up to 25%. This PSU has achieved 80 PLUS® Cer-
tification, the latest independent standard in power supply efficiency. In addition it 
features a variety of industrial-grade protective circuitry: OPP (over power protection), 
OVP (over voltage protection), UVP (under voltage protection), and SCP (short circuit 
protection).

Although caution has been taken to prevent sharp edges in your Antec case, we 
strongly recommend taking the appropriate time and care when working with it. 
Avoid hurried or careless motions. Please take reasonable precautions.
1.    Place the case upright on a flat, stable surface. 
2.

Remove the thumbscrew from the back of the top panel. Slide the panel 
towards the rear to remove it from the case.

3.

Inside the case you should see the power supply, some wiring with marked 
connectors (USB, PWR etc.), and installed I/O panel and a power cord. 

Upon opening the top panel, you will find that the case is divided into two separate 
chambers—the motherboard chamber and the HDD chamber. The power supply is 
designed to directly suck fresh air directly from outside the case. This unique feature 
combined with the dual chamber structure isolates heat and noise from each section, 
resulting in much quieter and cooler operation than a traditional desktop case.

This manual is not designed to cover CPU, RAM, or expansion card installation. 
Please consult the motherboard manual for specific mounting instructions and 
troubleshooting.
The motherboard is located inside the main chamber with two 80 mm TriCool™ 
fans preinstalled right next to the CPU.
1.

Lay the case down, with the open side facing up. The drive cages and power 
supply should be visible.

This manual is intended only as a guide for Antec’s Computer Enclosures. For more 
comprehensive instructions on installing the motherboard and peripherals, please 
refer to the user’s manuals that come with those components.