AEG AWFLJ4 900 166 654 데이터 시트

제품 코드
900 166 654
다운로드
페이지 13
LEWATIT CNP C
05715059 / 1.01
HANDLING AND STORAGE
7.
Packaging materials
Use original container.
:
Recommended
Remarks
Take precautionary measures against electrostatic discharges. Do
not allow to dry out.
Handling
Storage
Store between the following temperatures: -20 to 40°C (-4 to
104°F).  Store in accordance with local regulations.  Store in original
container protected from direct sunlight in a dry, cool and well-
ventilated area, away from incompatible materials (see section 10)
and food and drink.  Keep container tightly closed and sealed until
ready for use.  Containers that have been opened must be carefully
resealed and kept upright to prevent leakage.  Do not store in
unlabelled containers.  Use appropriate containment to avoid
environmental contamination.
Put on appropriate personal protective equipment (see section 8).
Eating, drinking and smoking should be prohibited in areas where
this material is handled, stored and processed. Workers should
wash hands and face before eating, drinking and smoking. Do not
ingest. Avoid contact with eyes, skin and clothing. Keep in the
original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Empty
containers retain product residue and can be hazardous.
:
8.
EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure limit values
Not available.
:
If this product contains ingredients with exposure limits, use process
enclosures, local exhaust ventilation or other engineering controls to
keep worker exposure below any recommended or statutory limits.
:
Technical measures
Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is
necessary.  Respirator selection must be based on known or
anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
:
Respiratory protection
Recommended monitoring
procedures
If this product contains ingredients with exposure limits, personal,
workplace atmosphere or biological monitoring may be required to
determine the effectiveness of the ventilation or other control
measures and/or the necessity to use respiratory protective
equipment.  Reference should be made to European Standard EN
689 for methods for the assessment of exposure by inhalation to
chemical agents and national guidance documents for methods for
the determination of hazardous substances.
Risk management measures
Personal protection measures
Occupational exposure controls
Date of issue
: 2009-06-15
Page: 3/6