Bosch ART 35 0600878M00 데이터 시트
제품 코드
0600878M00
English | 3
Bosch Power Tools
F 016 L70 955 | (12.10.12)
Inspect and maintain the trimmer regularly.
Have the trimmer repaired only by an authorized customer
Have the trimmer repaired only by an authorized customer
service agent.
Always ensure that the ventilation slots are kept clear of
debris.
Take care against injury from the blade fitted for cutting
the nylon line length. After feeding line always return the
trimmer to its horizontal operating position before switch-
ing on.
trimmer to its horizontal operating position before switch-
ing on.
Switch off and remove the plug from the socket:
– whenever you leave the machine unattended for any
period
– before replacing the cutting lline
– if the cable is entangled
– before cleaning or working on the line trimmer
– before removing the trimmer attachment
– if the cable is entangled
– before cleaning or working on the line trimmer
– before removing the trimmer attachment
After use, disconnect the machine from the mains and
check for damage.
Store the machine in a secure, dry place out of the reach of
children. Do not place other objects on top of the machine.
Replace worn or damaged parts for safety.
Ensure replacement parts fitted are Bosch approved.
Do not operate the machine without the trimmer at-
Ensure replacement parts fitted are Bosch approved.
Do not operate the machine without the trimmer at-
techment fitted.
Electrical Safety
Warning! Switch off, remove plug from mains before
adjusting, cleaning or if cable is cut, damaged or entan-
gled.
gled.
The cutting line continues to rotate for a few seconds
after the trimmer is switched off.
Caution – do not touch rotating cutting line.
Your machine is double insulated for safety and requires no
earth connection. The operating voltage is 230 V AC, 50 Hz
(for non-EU countries 220 V). Only use approved extension
cables. Contact your Bosch Service Centre for details.
Your machine is double insulated for safety and requires no
earth connection. The operating voltage is 230 V AC, 50 Hz
(for non-EU countries 220 V). Only use approved extension
cables. Contact your Bosch Service Centre for details.
It is recommended for increased electrical safety to use a
Residual Current Device (RCD) with a tripping current of
not more than 30 mA. Always check your RCD every time
you use it.
For products not sold in GB:
WARNING: For your safety, it is required that the plug at-
tached to the machine is connected with the extension cord.
The coupling of the extension cord must be protected against
splash water, be made of rubber or coated with rubber. The
extension cord must be used with a cable strain relief.
Residual Current Device (RCD) with a tripping current of
not more than 30 mA. Always check your RCD every time
you use it.
For products not sold in GB:
WARNING: For your safety, it is required that the plug at-
tached to the machine is connected with the extension cord.
The coupling of the extension cord must be protected against
splash water, be made of rubber or coated with rubber. The
extension cord must be used with a cable strain relief.
The connection lead must be inspected for signs of damage at
regular intervals and may only be used if in perfect condition.
regular intervals and may only be used if in perfect condition.
If the supply cord is damaged, it must be replaced by a Bosch
Service Centre.
Service Centre.
Extension cords/leads should only be used if they comply
with H05VV-F or H05RN-F types.
with H05VV-F or H05RN-F types.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Intended Use
The machine is intended for the cutting of grass and weeds
under bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
under bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
Intended use is related to operation within 0 °C and 40 °C
ambient temperature.
ambient temperature.
Symbol
Meaning
Wear protective gloves
Do not use flowing water to clean the
machine
machine
Reaction direction
Movement direction
Switching On
Switching Off
Prohibited action
Accessories/Spare Parts
OBJ_DOKU-32608-001.fm Page 3 Friday, October 12, 2012 10:36 AM