ConiuGo 700100107 EasyGuard II 700100107 사용자 설명서
제품 코드
700100107
19
Revision 9.0
GSM Alarm & Telemetry systems
<1> Enter PIN_PUK:
Enter the PIN-number if you put a new SIM-card into the Module or the PIN-number
of the SIM-card has changed. It is also possible to unlock the card by entering the
PUK (Pin-UnblocK) code.
Please note that, when you insert a new SIM card, you also need
another PIN. Please change after starting the system immedi-
ately to the basic settings to change the PIN. If you don’t do this
it could be that the false number was send to the new SIM card
and the card could be blocked.
<2> Change the SIM-PIN:
This function is not available in the current firmware version.
<3> Change Password
If you like to change the password, you have to enter it a second time for confirma-
tion. Note: The new password will only come into effect if you execute the function
<S>ave Changes in the main menu before leaving the configuration mode.
For safety reasons not even the manufacturer has any access to
a forgotten or unknown password. If a password has become
unknown the GSM module has to be sent to the manufacturer in
order to load a new firmware.
<4> Time and Date:
Choose between “Manual Input” or use of the “SMS Clock” to set the internal clock of
the GSM module. Setting the time is recommended if you have to watch events,
which begin or end at a previously defined time.
If you select “Manual Input”, the display shows the current settings of time and date
(e.g.: 12h 24m 3s / 14. 6. 2001). Enter the requested parameters in sequence.
Please note that the settings for the system clock get lost when the power
supply (power supply from mains and emergency accu) is lost. The modul then
will start again with the basic time. A real- time clock that is buffered by an
internal battery is available on request.
If you choose the “SMS Clock”, the module will adjust time and day automatically by
a procedure, that is patented by ConiuGo. To activate this kind of time setting the
SMS Clock has to be set to "ON".