Texas Instruments TPS61150A-150 Evaluation Board TPS61150AEVM-150 TPS61150AEVM-150 TPS61150AEVM-150 데이터 시트
제품 코드
TPS61150AEVM-150
www.ti.com
ENABLE
SLVS706 – OCTOBER 2006
DETAILED DESCRIPTION (continued)
Pulling either the SEL1 or SEL2 pin low turns off the corresponding output. If both SEL1 and SEL2 are low for
more than 40ms, the IC shuts down and consumes less than 2
more than 40ms, the IC shuts down and consumes less than 2
µ
A (room temperature) current. The SEL pin can
also be used for PWM brightness dimming. To improve PWM dimming linearity, soft start is disabled if the time
between falling and rising edges of two adjacent SELx pulses is less than 40ms. See APPLICATION
INFORMATION for details.
between falling and rising edges of two adjacent SELx pulses is less than 40ms. See APPLICATION
INFORMATION for details.
Each SEL input pin has an internal pull down resistor to disable the device when the pin is floating.
11