Texas Instruments Advanced bqMTester Multi-Station Test and Program Board Texas Instruments ADVANCED-BQMTESTER ADVANCED-BQMTESTER 데이터 시트
제품 코드
ADVANCED-BQMTESTER
Advanced bqMTester Instructions
NOTE:
If at any time you are asked to reboot, click No and continue.
8. When the software installs, click Finish to exit the software installation process.
All bqMTester software is now installed on the PC. Now, the EV2x00 drivers need to be associated with
the USB ports that will be used with bqMTester software, as described in the following section.
the USB ports that will be used with bqMTester software, as described in the following section.
4.2.3
EV2x00 Driver to USB Port Association
There are two drivers associated with the EV2x00. An instance of the two drivers must be associated with
each EV2x00 connected to the bqMTester PC through any USB port. In other words, each USB port that
has an EV2x00 connected to it must have an additional instance of the two EV2x00 drivers. That means
for 12 Advanced bqMTester stations, there will be a total of 24 drivers running at the same time. If an
EV2x00 is connected to the bqMTester PC and the PC detects that it has not had an EV2x00 connected
to that particular USB port, then the computer requires the following procedure to associate a copy of the
drivers for that USB port. To associate an instance of the EV2x00 drivers to any given USB port, do the
following:
each EV2x00 connected to the bqMTester PC through any USB port. In other words, each USB port that
has an EV2x00 connected to it must have an additional instance of the two EV2x00 drivers. That means
for 12 Advanced bqMTester stations, there will be a total of 24 drivers running at the same time. If an
EV2x00 is connected to the bqMTester PC and the PC detects that it has not had an EV2x00 connected
to that particular USB port, then the computer requires the following procedure to associate a copy of the
drivers for that USB port. To associate an instance of the EV2x00 drivers to any given USB port, do the
following:
1. Connect an EV2x00 to the bqMTester PC. After a few seconds, the Found New Hardware screen
appears. Select No, not this time and click Next. If the first screen that appears does not look like this
screen, then proceed to the next step. All of the following driver screens will only appear if the EV2x00
driver has not been previously installed on the system. Connect an EV2x00 to bqMTester PC. The
system acknowledges the EV2x00 if drivers were previously installed. The Microsoft USB host plug
manager announces installation with a tone.
screen, then proceed to the next step. All of the following driver screens will only appear if the EV2x00
driver has not been previously installed on the system. Connect an EV2x00 to bqMTester PC. The
system acknowledges the EV2x00 if drivers were previously installed. The Microsoft USB host plug
manager announces installation with a tone.
9
SLUU397A
–
February 2011
–
Revised May 2011
Advanced bqMTester
Copyright
©
2011, Texas Instruments Incorporated