Texas Instruments TLV320AIC3104 Evaluation Module (EVM) and USB motherboard TLV320AIC3104EVM-K TLV320AIC3104EVM-K 데이터 시트
제품 코드
TLV320AIC3104EVM-K
VCM
VCM
HPLOUT
HPLCOM
HPRCOM
HPROUT
DAC_L2
DAC_R2
PGA_L
PGA_L
PGA_L
PGA_L
DAC_L1
DAC_L1
DAC_L1
DAC_L1
DAC_R1
DAC_R1
DAC_R1
DAC_R1
B0159-01
PGA_R
PGA_R
PGA_R
PGA_R
Volume
Controls,
Mixing
Volume
Controls,
Mixing
Volume
Controls,
Mixing
Volume
Controls,
Mixing
Volume Level
0 dB to 9 dB, Mute
Volume Level
0 dB to 9 dB, Mute
Volume Level
0 dB to 9 dB, Mute
Volume Level
0 dB to 9 dB, Mute
SLAS510C – FEBRUARY 2007 – REVISED DECEMBER 2010
The output stage architecture leading to the high-power output drivers is shown in
, with the volume
control and mixing blocks being effectively identical to those shown in
. Note that each of these drivers
has an output level control block like those included with the line output drivers, allowing gain adjustment up to
9 dB on the output signal. As in the previous case, this output level adjustment is not intended to be used as a
standard volume control, but instead is included for additional full-scale output signal-level control.
9 dB on the output signal. As in the previous case, this output level adjustment is not intended to be used as a
standard volume control, but instead is included for additional full-scale output signal-level control.
Two of the output drivers, HPROUT and HPLOUT, include a direct connection path for the stereo DAC outputs to
be passed directly to the output drivers and bypass the analog volume controls and mixing networks, using the
DAC_L2/R2 path. As in the line output case, this functionality provides the highest quality DAC playback
performance with reduced power dissipation, but can only be used if the DAC is not being routed to multiple
output drivers simultaneously, and if mixing of the DAC output with other analog signals is not needed.
be passed directly to the output drivers and bypass the analog volume controls and mixing networks, using the
DAC_L2/R2 path. As in the line output case, this functionality provides the highest quality DAC playback
performance with reduced power dissipation, but can only be used if the DAC is not being routed to multiple
output drivers simultaneously, and if mixing of the DAC output with other analog signals is not needed.
Figure 32. Architecture of the Output Stage Leading to the High-Power Output Drivers
40
Copyright © 2007–2010, Texas Instruments Incorporated
Product Folder Links: